Injector Dynamics ID1300X for Holden Commodore E HSV series LS3 – set of 8. ID1300X Injector set – standard (no adapter top), orange lower o-ring. The ID1300x² is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300x² was designed with alternative fuels in mind, and was originally the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the ID1300x² was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300x² has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300x² allows fitment in 200+ applications, making it the most versatile injector in our lineup. Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi). Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels). Thank you for visiting our listing, if you have any question please don’t hesitate to ask us! Many items that do not state “In Stock” are in stock. However, some are not. We have no control over their policies. Quantity on Hand / Quantity Available: Quantity on hand is subject to change at any given time. Due to the rapid pace, we may not always have the physical stock. The return item has been used or installed. We expect to earn FIVE STAR ratings from you. We will do everything possible to remedy anything that has gone wrong and make you happy! Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. Thank you for looking at our item, and we do hope to do business with you. The item “Injector Dynamics ID1300X for Holden Commodore E HSV series LS3 set of 8″ is in sale since Tuesday, December 4, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “myjdmparts” and is located in Brea, California. This item can be shipped worldwide.
- Country of Manufacturer: United States
- Manufacturer Part Number: 1300.34.14.15.8
- Brand: Injector Dynamics
Injector Dynamics Direct Warehouse Distributor – All ID Products Available! NEW Injector Dynamics 1050cc Fuel Injectors. These injectors are IN STOCK, on our shelves. You will receive a Set of 8 BRAND NEW Injector Dynamics for fuel injectors similar to the photo. The ID1050 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community. This series of innovations and “firsts” have made it the most popular – and most copied – injector on the market today. With a maximum pressure capability of 7 bar and smooth response at low flow, this is a versatile injector that will be at home in many different applications. From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1050 set the standard and marked the beginning of a new era in fuel injector performance. The first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly. The first injector to be offered in dead time matched sets. The first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder. The first injector offered with the now standard “Top Hat Adapter” making it plug and play in nearly any application. The Injector Dynamics Data. Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so its no wonder that if youre tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professional tuner, or an end user, you can spend countless hours getting it mostly correct or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability. Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers. These Injector Dynamics fuel injectors will fit many applications, including, but not limited to. Holden Commodore VZ LS2 Holden Commodore W427 LS7 These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Commodore E-HSV These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Monaro LS2 Slope and Offset vs. Pressure data and tuning data for EFI Live and HP Tuners are available upon request. All high performance injectors will require ECU tuning for proper performance. We have injectors to fit almost every performance application! We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627. The free listing tool. The item “Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8″ is in sale since Tuesday, May 19, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “treperformance” and is located in Costa Mesa, California. This item can be shipped worldwide.
- Part Brand: Injector Dynamics
- Placement on Vehicle: Front
- Important Information: Verify Flow Rate is what you need
- Interchange Part Number: VZ LS2 LS3 LS7 LS9 EV6 USCAR 1000cc/min
- Brand: Injector Dynamics
- Warranty: Yes
- Core Charge: None
- Manufacturer Part Number: 1050.34.14.15.8.Holden