Category Archives: superpro

Superpro-Front-Sway-Bar-Link-Kit-For-Holden-Commodore-Ve-Vf-Hsv-Gts-Maloo-W427-01-pa

Superpro Front Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Gts Maloo W427

Superpro Front Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Gts Maloo W427

Superpro Front Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Gts Maloo W427
Please make sure this fits. 10MM BALL JOINT ADJUSTABLE LINK MINIMUM LENGTH 300 MM MAXIMUM LENGTH 345 MM. EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SUPERPRO FRONT SWAY BAR LINK KIT FOR HOLDEN COMMODORE VE VF HSV GTS MALOO W427″ is in sale since Friday, August 4, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Sway Bars”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: TRC10245
  • Brand: SUPERPRO

Superpro Front Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Gts Maloo W427
SUPERPRO-COMPLETE-FRONT-END-BUSH-KIT-for-HOLDEN-COMMODORE-VB-VC-VH-VK-VL-VN-HSV-01-rwg

SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN HSV

SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN HSV

SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN HSV
SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN INC HSV. HOLDEN COMMODORE VB VC VH VK VL VN INC HSV. SPF0251K – CONTROL ARM LOWER INNER BUSHES. SPF2092BK – SWAYBAR LINK BUSHING. SPF0240K – FRONT CASTER ROD BUSHES (STRUT BAR TO CHASSIS MOUNT KIT). SPF0756K – STRUT BAR TO LOWER CONTROL ARM KIT. Knurling is used to enable unrestricted pivoting of the polyurethane bush around the crush tube or any other mating steel surfaces. The knurling has inherent design advantages – reducing the surface area of polyurethane in contact with the crush tube, which results in less frictional force being developed. The design of the SuperPro knurl bore combined with the integral grease retention lips, keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing. Bullet grooves are incorporated in the design of SuperPro bushes to allow for variances in control arm or spring eyes. The voiding and bullet grooves also allow for the transgression of displaced polyurethane into the volume of the grooves as the loads of normal vehicle operation are applied. Even though polyurethane is in a solid form when it is manufactured into bushes, its unique properties enable it flow in a manner similar to a liquid when loaded. The action of the bush flowing into its voids prevents the generation of noise, vibration and harshness within the bush and its mount. The tangential grease grooves in the heads of shackle bushes reduce the friction between the head of the bush and the shackle plates. The grooves store grease, which is smeared around the mating surfaces when the spring shackles rotate, forming a lubrication boundary layer. This has the effect of minimising head friction and reducing noise. The Research and Development process for SuperPro products constantly gathers information and feedback to provide continuous product improvements. Superpro constantly re-engineers and tests its products on their own fleet of passenger vehicles and Four Wheel Drives. Cyclic testing is performed using specifically designed testing equipment, to offer valuable information on the life and durability of SuperPro products. Australia’s diversely unique conditions provide the perfect testing ground for SuperPro products. Encompassing everything from extreme heat, dust, and harsh roads to race circuits, rally tracks, speedways and drag strips, SuperPro products are extensively tested in a variety of conditions to ensure the highest quality performance and reliability. SuperPro products are also further tested in the diverse climates of Africa, Asia, Australasia, Europe, Middle East, South Pacific, UK and USA. The item “SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN HSV” is in sale since Monday, April 18, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “automotiveonline2012″ and is located in BRISBANE, Queensland. This item can be shipped worldwide.
  • Manufacturer Part Number: SPF0251K, SPF2092BK, SPF0240K, SPF0756K -Z1
  • Brand: SUPERPRO

SUPERPRO COMPLETE FRONT END BUSH KIT for HOLDEN COMMODORE VB VC VH VK VL VN HSV
SUPERPRO-Vehicle-Enhancement-Kit-for-HOLDEN-COMMODORE-VE-STATSMEN-WM-HSV-01-xwve

SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV

SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV

SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV
Please make sure this fits. Front Control Arm Lower-Inner Bush Kit. Front Strut Bar To Chassis Mount Bush Kit. Rear Control Arm Lower-Inner Bush Kit. Rear Control Arm Lower-Outer Bush Kit. Rear Control Arm Upper-Inner Rear Bush Kit. Rear Toe Control Arm Inner Bush Kit. Rear Trailing Arm Bush Kit. Axle alignment required after fitting. Fitting Position : Front and Rear. International (outside Australia) EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV” is in sale since Monday, March 14, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Control Arms”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: KIT175K
  • Brand: SUPERPRO

SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV
Superpro-Front-Rear-Sway-Bar-Link-Kit-For-Holden-Commodore-Ve-Vf-Hsv-Calais-01-zz

Superpro Front & Rear Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Calais

Superpro Front & Rear Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Calais

Superpro Front & Rear Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Calais
Please make sure this fits. EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SUPERPRO FRONT & REAR SWAY BAR LINK KIT FOR HOLDEN COMMODORE VE VF HSV CALAIS” is in sale since Thursday, August 3, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Sway Bars”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: TRC10245 TRC1045
  • Kit or Single Part: Kit
  • Brand: SuperPro

Superpro Front & Rear Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Calais
SuperPro-FRONT-Caster-ARM-Set-FOR-HOLDEN-COMMODORE-VE-CAPRICE-WM-HSV-PONTIAC-G8-01-xfj

SuperPro FRONT Caster ARM Set FOR HOLDEN COMMODORE VE CAPRICE WM HSV PONTIAC G8

SuperPro FRONT Caster ARM Set FOR HOLDEN COMMODORE VE CAPRICE WM HSV PONTIAC G8

SuperPro FRONT Caster ARM Set FOR HOLDEN COMMODORE VE CAPRICE WM HSV PONTIAC G8
Please make sure this fits. Left and Right Replacement Arms for Repair or Performance Upgrade. For greater directional stability and Improved turn in. Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement. Designed to Increase or Decrease Caster by +/- 1 Degree. These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O. E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions. SuperPro Tip – SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SuperPro FRONT Caster ARM Set FOR HOLDEN COMMODORE VE CAPRICE WM HSV PONTIAC G8″ is in sale since Friday, August 4, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Control Arms”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: B1020R
  • Brand: BETTARIDE

SuperPro FRONT Caster ARM Set FOR HOLDEN COMMODORE VE CAPRICE WM HSV PONTIAC G8
SuperPro-Engine-Mount-Kit-FOR-HOLDEN-COMMODORE-VE-VF-V6-V8-3-6L-6-0L-6-2L-HSV-01-ly

SuperPro Engine Mount Kit FOR HOLDEN COMMODORE VE VF V6 V8 3.6L 6.0L 6.2L HSV

SuperPro Engine Mount Kit FOR HOLDEN COMMODORE VE VF V6 V8 3.6L 6.0L 6.2L HSV

SuperPro Engine Mount Kit FOR HOLDEN COMMODORE VE VF V6 V8 3.6L 6.0L 6.2L HSV
Please make sure this fits. The Engine Mount has been optimised for longevity, durability and performance by utilising SuperPro Hybrid material to reduce the overall movement of the engine, without compromising NVH. This Engine Mount Kit has some very clever engineering built in to produce the best engine mount available for these vehicles. The SuperPro Engine Mounts perform superbly in a standard application, but they really shine in a high performance application. With the movement controlled by the internals of the mount and the superior durability of the material even the highest performance vehicles will benefit from a mount that still maintains the original feel! International (outside Australia) EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SuperPro Engine Mount Kit FOR HOLDEN COMMODORE VE VF V6 V8 3.6L 6.0L 6.2L HSV” is in sale since Thursday, February 4, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Engines, Components\Motor Mounts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: TRC2000
  • Brand: SUPERPRO

SuperPro Engine Mount Kit FOR HOLDEN COMMODORE VE VF V6 V8 3.6L 6.0L 6.2L HSV
SUPERPRO-Holden-Commodore-VE-SUPER-PRO-Front-Suspension-Bush-Kit-V6-V8-HSV-01-tvx

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV
SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV. HOLDEN COMMODORE VE MODELS. Lower Control Arm INNER Bushes SPF2862K. Caster Rod bushes (STRUT BAR TO CHASSIS MOUNT BUSH SPF2858K). Top Strut Mounts SPF1590K. Sway Bar Mount Bushes SPF-2863_ _K. The specially blended Polyurethane used in SuperPro products has specific mechanical properties that make it extremely successful in its applications. The combined properties of extreme resistance to abrasion, low compression set, high tear strength, and a resistance to oils and solvents makes SuperPro ideal for most automotive applications. These properties lead to a resilient product that is highly versatile in its various applications. Knurling is used to enable unrestricted pivoting of the polyurethane bush around the crush tube or any other mating steel surfaces. The knurling has inherent design advantages – reducing the surface area of polyurethane in contact with the crush tube, which results in less frictional force being developed. The design of the SuperPro knurl bore combined with the integral grease retention lips, keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing. Bullet grooves are incorporated in the design of SuperPro bushes to allow for variances in control arm or spring eyes. The voiding and bullet grooves also allow for the transgression of displaced polyurethane into the volume of the grooves as the loads of normal vehicle operation are applied. Even though polyurethane is in a solid form when it is manufactured into bushes, its unique properties enable it flow in a manner similar to a liquid when loaded. The action of the bush flowing into its voids prevents the generation of noise, vibration and harshness within the bush and its mount. The tangential grease grooves in the heads of shackle bushes reduce the friction between the head of the bush and the shackle plates. The grooves store grease, which is smeared around the mating surfaces when the spring shackles rotate, forming a lubrication boundary layer. This has the effect of minimising head friction and reducing noise. The Research and Development process for SuperPro products constantly gathers information and feedback to provide continuous product improvements. Superpro constantly re-engineers and tests its products on their own fleet of passenger vehicles and Four Wheel Drives. Cyclic testing is performed using specifically designed testing equipment, to offer valuable information on the life and durability of SuperPro products. Australia’s diversely unique conditions provide the perfect testing ground for SuperPro products. Encompassing everything from extreme heat, dust, and harsh roads to race circuits, rally tracks, speedways and drag strips, SuperPro products are extensively tested in a variety of conditions to ensure the highest quality performance and reliability. SuperPro products are also further tested in the diverse climates of Africa, Asia, Australasia, Europe, Middle East, South Pacific, UK and USA. The item “SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV” is in sale since Tuesday, March 19, 2013. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “automotiveonline2012″ and is located in BRISBANE, Queensland. This item can be shipped worldwide.
  • Manufacturer Part Number: SPF-VE-F-KIT
  • Brand: SUPER PRO

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV
SUPERPRO-Front-Rear-Adjustable-Sway-bar-for-Holden-VE-Commodore-HSV-01-quby

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV
SUPERPRO for Holden VE Commodore & HSV Front+Rear Adjustable Sway bar. Sway Bar Stabiliser Kit. Roll Control Performance Sway Bar Upgrade Kit. 30mm Front 2 Point Adjustable and 22mm Rear 3 Point Adjustable Sway Bars. Components Per Product: 2 SB, 4 Links, 4 B. Kit includes Front and Rear Sway Bars and Heavy Duty High Articulation Sway Bar Links. The SuperPro Roll Control two position adjustable front sway bar is 30mm solid and the rear is a three position adjustable 22mm solid sway bar. Add in the SuperPro Adjustable sway bar links to. Eliminate sway bar link flex. Maintain neutral sway bar positioning. Maximize all positions on the adjustable Sway Bars. From all our testing, this what we recommend as a good starting point. Stage one is to set both bars to the hardest setting and is ideally suited to a vehicle with standard suspension, wheels and tyres. Stage two is to set the front to the soft setting and the rear to the hardest setting and is ideally to a vehicle with lowered springs, or with larger, wider wheels and tyres. Stage three is to set both bars to the soft setting and is ideally suited to a vehicle with fitted with a coil over kit or sports suspension pack. This SuperPro Roll Control Sway Bar Kit will make the suspension system and tyres perform better, making the car more responsive while delivering more grip. Axle alignment required after fitting. Knurling is used to enable unrestricted pivoting of the polyurethane bush around the crush tube or any other mating steel surfaces. The knurling has inherent design advantages – reducing the surface area of polyurethane in contact with the crush tube, which results in less frictional force being developed. The design of the SuperPro knurl bore combined with the integral grease retention lips, keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing. Bullet grooves are incorporated in the design of SuperPro bushes to allow for variances in control arm or spring eyes. The voiding and bullet grooves also allow for the transgression of displaced polyurethane into the volume of the grooves as the loads of normal vehicle operation are applied. Even though polyurethane is in a solid form when it is manufactured into bushes, its unique properties enable it flow in a manner similar to a liquid when loaded. The action of the bush flowing into its voids prevents the generation of noise, vibration and harshness within the bush and its mount. The tangential grease grooves in the heads of shackle bushes reduce the friction between the head of the bush and the shackle plates. The grooves store grease, which is smeared around the mating surfaces when the spring shackles rotate, forming a lubrication boundary layer. This has the effect of minimising head friction and reducing noise. The Research and Development process for SuperPro products constantly gathers information and feedback to provide continuous product improvements. Superpro constantly re-engineers and tests its products on their own fleet of passenger vehicles and Four Wheel Drives. Cyclic testing is performed using specifically designed testing equipment, to offer valuable information on the life and durability of SuperPro products. Australia’s diversely unique conditions provide the perfect testing ground for SuperPro products. Encompassing everything from extreme heat, dust, and harsh roads to race circuits, rally tracks, speedways and drag strips, SuperPro products are extensively tested in a variety of conditions to ensure the highest quality performance and reliability. SuperPro products are also further tested in the diverse climates of Africa, Asia, Australasia, Europe, Middle East, South Pacific, UK and USA. Most items are delivered within 1-7 days depending on size and location within Australia. Although we stock many thousands of product lines in our warehouse it is not possible due to space and financial restraints to stock all products that are actually available. If we do not have the product in stock there could possibly be a short delay of around 3-7 days to get the item into stock from the particular importers and dispatched and on its way. The item “SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV” is in sale since Tuesday, March 29, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “automotiveonline2012″ and is located in BRISBANE, Queensland. This item can be shipped worldwide.
  • Kit Parts Included: Sway Bar
  • Manufacturer Part Number: RCCOM001KIT
  • Placement on Vehicle: Rear
  • Brand: SUPERPRO

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV