Tag Archives: adjustable

K-SPORT-ADJUSTABLE-COILOVER-suspension-KIT-FIT-HOLDEN-COMMODORE-VE-HSV-INC-UTE-01-kys

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
PERFORMANCE + COMFORTABLE KIT. 999AUTOSHOP IS NOT a “ONLINE ONLY” COMPANY, WE HAVE SHOWROOM/WORKSHOP IN SYDNEY + BRISBANE AUSTRALIA, WE CAN ALWAYS HELP OUR CUSTOMER FOR INSTALLATION OR ALL THE SUPPORT! Fully adjustable suspension kit with 36 levels of dampening and rebound, plus fully height adjustable. Easy installation and ride height adjustment. High Tolerance Springs. Installation Note: âââ¬Ã¢ When installing this product, the operator shall wear gloves to avoid the risk of hand injury. The upper holder used in this shock must be K-Sport’s original component. This shock absorbers may not be compatible with the upper holder of other brands. âââ¬Ã¢ K-Sport shall not take any liability for damage to the shock or accidents that are caused by connecting the upper holder of other brands with this shock. âââ¬Ã¢ Be sure to observe local relevant vehicle regulations about usage of adjustable shock absorbers. (For example, height limit, headlight ground clearance limit) âââ¬Ã¢ K-Sport shall hold no liability for any violation against local vehicle regulations or laws. âââ¬Ã¢ According to the installation instructions, avoid uneven road surface and driving at low speed. âââ¬Ã¢ Ensure that components of the product are not loosened or oil is not leaking. âââ¬Ã¢ Tighten all components with specified torque periodically. âââ¬Ã¢ When a suitable height is determined it shall be tested and calibrated on straight line. âââ¬Ã¢ The vehicle should go to a specified workshop or a commissioned vehicle calibration center to adjust the calibration. Technical The damping setting and spring rate for this product is different from the vehicle’s original shock absorbers. Any shock absorbers can be disassembled completely to change the damping setting. Disassembling the shock absorber also offers a chance for inspection and service to the shock. However, disassembling of the shock absorbers can only be performed by K-Sport’s certified professional technicians. BANK DETAIL : – NAB. Although we will try our best to amend order details if necessary, we cannot guarantee that it can be done. We are more than happy to assist you. The item “K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE” is in sale since Tuesday, October 22, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Other”. The seller is “999autoshop” and is located in Epping, NSW. This item can be shipped worldwide.
  • Manufacturer Part Number: ksxxxx(16658)
  • Brand: k sport
  • Item Picture: NOT the Actual Item (For Reference Only)
  • MPN: ksxxxx(16658)
  • Return Postage Charges: Buyer will pay for any return postage

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
Syc-Adjustable-Damper-Coilovers-F-r-Set-For-Holden-Commodore-Ss-Vz-Sedan-Hsv-01-cbjd

Syc Adjustable Damper Coilovers F&r Set For Holden Commodore Ss Vz Sedan Hsv

Syc Adjustable Damper Coilovers F&r Set For Holden Commodore Ss Vz Sedan Hsv

Syc Adjustable Damper Coilovers F&r Set For Holden Commodore Ss Vz Sedan Hsv
FITTING POSITION: FRONT & REAR BASE HEIGHT ADJUSTABLE WITH DAMPENING AND REBOUND ADJUSTMENT. Please ask us if you need to do bank deposit/transfer. (REGISTERED POST WITH TRACKING & SIGNATURE). Express International Service will be used for parcel over 2KG. In some rare exceptions, if we are not able to contact you within this time period, please send us emails. We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. The item “SYC ADJUSTABLE DAMPER COILOVERS F&R SET FOR HOLDEN COMMODORE SS VZ SEDAN HSV” is in sale since Wednesday, November 23, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Brand: SYC
  • Manufacturer Part Number: SYC-F11

Syc Adjustable Damper Coilovers F&r Set For Holden Commodore Ss Vz Sedan Hsv
K-sport-Adjustable-Damper-Coilovers-For-Holden-Commodore-Vf-13-on-Hsv-Inc-Ute-01-nhe

K-sport Adjustable Damper Coilovers For Holden Commodore Vf 13-on Hsv Inc Ute

K-sport Adjustable Damper Coilovers For Holden Commodore Vf 13-on Hsv Inc Ute

K-sport Adjustable Damper Coilovers For Holden Commodore Vf 13-on Hsv Inc Ute
X NPOWER SUSPENSION PARTS. KS-HO-007 – K-Sport Coilovers. COMMODORE VF (2013/6-ON) (Front & Rear). Fitting Position: FRONT & REAR Spring Rate : FRONT 10KG, REAR 8KG. Qty required per vehicle: 1. Description: – Fully adjustable suspension kit with 36 levels of dampening and rebound, plus fully height adjustable. Easy installation and ride height adjustment. High Tolerance Springs Installation Note: When installing this product, the operator shall wear gloves to avoid the risk of hand injury. The upper holder used in this shock must be K-Sport’s original component. This shock absorbers may not be compatible with the upper holder of other brands. K-Sport shall not take any liability for damage to the shock or accidents that are caused by connecting the upper holder of other brands with this shock. Be sure to observe local relevant vehicle regulations about usage of adjustable shock absorbers. (For example, height limit, headlight ground clearance limit) K-Sport shall hold no liability for any violation against local vehicle regulations or laws. According to the installation instructions, avoid uneven road surface and driving at low speed. Ensure that components of the product are not loosened or oil is not leaking. Tighten all components with specified torque periodically. When a suitable height is determined it shall be tested and calibrated on straight line. The vehicle should go to a specified workshop or a commissioned vehicle calibration center to adjust the calibration. Technical The damping setting and spring rate for this product is different from the vehicle’s original shock absorbers. Any shock absorbers can be disassembled completely to change the damping setting. Disassembling the shock absorber also offers a chance for inspection and service to the shock. However, disassembling of the shock absorbers can only be performed by K-Sport’s certified professional technicians. Please ask us if you need to do bank deposit/transfer. (REGISTERED POST WITH TRACKING & SIGNATURE). Express International Service will be used for parcel over 2KG. The item “K-SPORT ADJUSTABLE DAMPER COILOVERS FOR HOLDEN COMMODORE VF 13-ON HSV INC UTE” is in sale since Tuesday, March 15, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Brand: K-SPORT
  • Manufacturer Part Number: KS-HO-007

K-sport Adjustable Damper Coilovers For Holden Commodore Vf 13-on Hsv Inc Ute
Holden-Commodore-Ve-Vf-Sv6-V8-Hsv-Adjustable-Rear-Toe-Control-Arm-01-xl

Holden Commodore Ve Vf Sv6 V8 Hsv Adjustable Rear Toe Control Arm

Holden Commodore Ve Vf Sv6 V8 Hsv Adjustable Rear Toe Control Arm

Holden Commodore Ve Vf Sv6 V8 Hsv Adjustable Rear Toe Control Arm
HOLDEN COMMODORE VE VF SV6 V8 HSV ADJUSTABLE REAR TOE CONTROL ARM. VE SEDAN / WAGON / UTE 06-2013. VF SEDAN / WAGON / UTE 2013-ON. INC HSV CLUBSPORT & MALOO. Package Includes: 1 Complete Set as shown. Installation: No Instruction Included, Professional Installation is Recommended! All products are tested and proven before sell to the market. The item “HOLDEN COMMODORE VE VF SV6 V8 HSV ADJUSTABLE REAR TOE CONTROL ARM” is in sale since Wednesday, April 11, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “togautogroup” and is located in Underwood, Queensland. This item can be shipped worldwide.
  • Manufacturer Part Number: TOG-SC-TOG01
  • Brand: TOG

Holden Commodore Ve Vf Sv6 V8 Hsv Adjustable Rear Toe Control Arm
SUPERPRO-Front-Rear-Adjustable-Sway-bar-for-Holden-VE-Commodore-HSV-01-quby

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV
SUPERPRO for Holden VE Commodore & HSV Front+Rear Adjustable Sway bar. Sway Bar Stabiliser Kit. Roll Control Performance Sway Bar Upgrade Kit. 30mm Front 2 Point Adjustable and 22mm Rear 3 Point Adjustable Sway Bars. Components Per Product: 2 SB, 4 Links, 4 B. Kit includes Front and Rear Sway Bars and Heavy Duty High Articulation Sway Bar Links. The SuperPro Roll Control two position adjustable front sway bar is 30mm solid and the rear is a three position adjustable 22mm solid sway bar. Add in the SuperPro Adjustable sway bar links to. Eliminate sway bar link flex. Maintain neutral sway bar positioning. Maximize all positions on the adjustable Sway Bars. From all our testing, this what we recommend as a good starting point. Stage one is to set both bars to the hardest setting and is ideally suited to a vehicle with standard suspension, wheels and tyres. Stage two is to set the front to the soft setting and the rear to the hardest setting and is ideally to a vehicle with lowered springs, or with larger, wider wheels and tyres. Stage three is to set both bars to the soft setting and is ideally suited to a vehicle with fitted with a coil over kit or sports suspension pack. This SuperPro Roll Control Sway Bar Kit will make the suspension system and tyres perform better, making the car more responsive while delivering more grip. Axle alignment required after fitting. Knurling is used to enable unrestricted pivoting of the polyurethane bush around the crush tube or any other mating steel surfaces. The knurling has inherent design advantages – reducing the surface area of polyurethane in contact with the crush tube, which results in less frictional force being developed. The design of the SuperPro knurl bore combined with the integral grease retention lips, keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing. Bullet grooves are incorporated in the design of SuperPro bushes to allow for variances in control arm or spring eyes. The voiding and bullet grooves also allow for the transgression of displaced polyurethane into the volume of the grooves as the loads of normal vehicle operation are applied. Even though polyurethane is in a solid form when it is manufactured into bushes, its unique properties enable it flow in a manner similar to a liquid when loaded. The action of the bush flowing into its voids prevents the generation of noise, vibration and harshness within the bush and its mount. The tangential grease grooves in the heads of shackle bushes reduce the friction between the head of the bush and the shackle plates. The grooves store grease, which is smeared around the mating surfaces when the spring shackles rotate, forming a lubrication boundary layer. This has the effect of minimising head friction and reducing noise. The Research and Development process for SuperPro products constantly gathers information and feedback to provide continuous product improvements. Superpro constantly re-engineers and tests its products on their own fleet of passenger vehicles and Four Wheel Drives. Cyclic testing is performed using specifically designed testing equipment, to offer valuable information on the life and durability of SuperPro products. Australia’s diversely unique conditions provide the perfect testing ground for SuperPro products. Encompassing everything from extreme heat, dust, and harsh roads to race circuits, rally tracks, speedways and drag strips, SuperPro products are extensively tested in a variety of conditions to ensure the highest quality performance and reliability. SuperPro products are also further tested in the diverse climates of Africa, Asia, Australasia, Europe, Middle East, South Pacific, UK and USA. Most items are delivered within 1-7 days depending on size and location within Australia. Although we stock many thousands of product lines in our warehouse it is not possible due to space and financial restraints to stock all products that are actually available. If we do not have the product in stock there could possibly be a short delay of around 3-7 days to get the item into stock from the particular importers and dispatched and on its way. The item “SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV” is in sale since Tuesday, March 29, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “automotiveonline2012″ and is located in BRISBANE, Queensland. This item can be shipped worldwide.
  • Kit Parts Included: Sway Bar
  • Manufacturer Part Number: RCCOM001KIT
  • Placement on Vehicle: Rear
  • Brand: SUPERPRO

SUPERPRO Front+Rear Adjustable Sway bar for Holden VE Commodore & HSV
SYC-ADJUSTABLE-Coilover-SHOCK-SET-SUIT-HOLDEN-COMMODORE-VE-HSV-INC-UTE-NEW-01-an

SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW

SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW

SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
QUALITY AFTER MARKET PARTS / GENUINE PRODUCTS. High Performance Track / Racing / DRiFT / STREET CAR PARTS!! SYC COILOVER SUSPENSION KIT. FITTING POSITION: FRONT & REAR. SPRING RATE FRONT: 12KG; REAR: 6KG. RETAIL PRICE = 1550+ /SET. HOT HOT HOT HOT DEAL. The all new SYC Coilover Kit. Great Price with good ride quality. Base Height Adjustable with dampening and rebound adjustment. Awesome alternative to just lowered springs and shocks. Please advise of model in checkout. Professional Installation is Highly Recommended. SOME PICTURES FOR BRAND IMAGE ONLY, CUSTOMER WILL RECEIVE THE KIT THAT WE LISTED ON THE TITLE,,. SKRacingPRO – – PERFORMANCE PRODUCTS. Item Name/ Part Number. We expect to hear from you within. Please make sure your. Although we will try our best to amend order details if. Necessary, we cannot guarantee that it can be done. Please verify the correct part before ordering and installing. We are more than happy to assist you. If for any reason you are not happy with our. We appreciate your Positive. The item “SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW” is in sale since Monday, March 20, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Other”. The seller is “autoparts2003″ and is located in West Ryde, NSW. This item can be shipped worldwide.
  • Manufacturer Part Number: DX11-072
  • Brand: SYCCOILOVER
  • MPN: DX11-072

SYC ADJUSTABLE Coilover SHOCK SET SUIT HOLDEN COMMODORE VE HSV INC UTE NEW
Syc-Adjustable-Damper-Coilovers-Front-Pair-For-Holden-Commodore-Ve-Hsv-Inc-Ute-01-cccy

Syc Adjustable Damper Coilovers Front Pair For Holden Commodore Ve Hsv Inc Ute

Syc Adjustable Damper Coilovers Front Pair For Holden Commodore Ve Hsv Inc Ute

Syc Adjustable Damper Coilovers Front Pair For Holden Commodore Ve Hsv Inc Ute
FITTING POSITION: FRONT QTY REQUIRED PER VEHICLE: 1 BASE HEIGHT ADJUSTABLE WITH DAMPENING AND REBOUND ADJUSTMENT. Please ask us if you need to do bank deposit/transfer. (REGISTERED POST WITH TRACKING & SIGNATURE). Express International Service will be used for parcel over 2KG. In some rare exceptions, if we are not able to contact you within this time period, please send us emails. We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. The item “SYC ADJUSTABLE DAMPER COILOVERS FRONT PAIR FOR HOLDEN COMMODORE VE HSV INC UTE” is in sale since Thursday, July 21, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Brand: SYC
  • Manufacturer Part Number: SYC-F6-F

Syc Adjustable Damper Coilovers Front Pair For Holden Commodore Ve Hsv Inc Ute
Syc-Adjustable-Damper-Coilovers-Rear-Pair-For-Holden-Commodore-Ve-Hsv-Inc-Ute-01-tyo

Syc Adjustable Damper Coilovers Rear Pair For Holden Commodore Ve Hsv Inc Ute

Syc Adjustable Damper Coilovers Rear Pair For Holden Commodore Ve Hsv Inc Ute

Syc Adjustable Damper Coilovers Rear Pair For Holden Commodore Ve Hsv Inc Ute
FITTING POSITION: REAR SPRING RATE: 8KG QTY REQUIRED PER VEHICLE: 1 BASE HEIGHT ADJUSTABLE WITH DAMPENING AND REBOUND ADJUSTMENT. Please ask us if you need to do bank deposit/transfer. (REGISTERED POST WITH TRACKING & SIGNATURE). Express International Service will be used for parcel over 2KG. In some rare exceptions, if we are not able to contact you within this time period, please send us emails. We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. The item “SYC ADJUSTABLE DAMPER COILOVERS REAR PAIR FOR HOLDEN COMMODORE VE HSV INC UTE” is in sale since Monday, August 1, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Brand: SYC
  • Manufacturer Part Number: SYC-F6-R

Syc Adjustable Damper Coilovers Rear Pair For Holden Commodore Ve Hsv Inc Ute
Syc-Adjustable-Damper-Coilovers-Set-For-Holden-Hsv-Commodore-Sedan-Wagon-Ve-Ute-01-uls

Syc Adjustable Damper Coilovers Set For Holden Hsv Commodore Sedan Wagon Ve Ute

Syc Adjustable Damper Coilovers Set For Holden Hsv Commodore Sedan Wagon Ve Ute

Syc Adjustable Damper Coilovers Set For Holden Hsv Commodore Sedan Wagon Ve Ute
Please make sure this fits. International (outside Australia) EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SYC ADJUSTABLE DAMPER COILOVERS SET FOR HOLDEN HSV COMMODORE SEDAN WAGON VE UTE” is in sale since Monday, May 2, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.
  • Manufacturer Part Number: SYC-F6
  • Brand: SYC

Syc Adjustable Damper Coilovers Set For Holden Hsv Commodore Sedan Wagon Ve Ute