Tag Archives: leads

Race-Spark-Plug-Leads-for-Holden-HSV-LS1-5-7L-V8-Commodore-Calais-VT-VU-VX-VY-VZ-01-cba

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
Colour: RED, also available in BLUE. Lowest resistance of any wire – Made in the USA. Brand new, genuine B&B OML race performance ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. Comes with a packet of dielectric grease. About B&B OML: The Platinum Racing Wire Sets. B&B Platinum Racing Wires deliver ultimate electric performance through the best conductor ever made. They are engineered with a double pure silicone insulation braided for added pull strength and a Ferro spiral conductor with a low resistance impregnated core, which creates an outstanding RFI choke suppression. Wires are wound tighter for the lowest resistance available in the market (25 ohms per foot resistance). Best choice for both race and street applications. Extra thick 10mm diameter; and. Outer silicone jacket available in bright colors: blue, red and yellow. This wire set is direct-imported from an authorised B&B supplier in the USA. Buyers are also protected by Australian consumer law.
Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
VF-Holden-Commodore-HSV-LS3-6-2lt-V8-8-5mm-Aeroflow-Black-Ignition-Leads-New-01-ube

VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New

VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New

VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
Aeroflow XPro Xtreme Ignition Products 8.5mm High Performance Black Ignition Leads. Suitable for VF Holden Commodore & HSV LS3 6.2lt V8. Aeroflow has become synonymous with premium quality performance products. Aeroflow’s objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability. The Aeroflow 8.5mm XPro Wire is “the” performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of XPro Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, Aeroflow use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Aeroflow’s 8.5mm XPro wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot–but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. Of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Supplied complete with clip on numbered lead markers. Diameter (mm): 8.50mm. Distributor Terminal Ends: Stock. Distributor Boot Color: Black. Distributor Boot Material: Silicone. Spark Plug Boot Ends: Eight multi-angle. Spark Plug Boot Color: Black. Spark Plug Boot Material: Silicone. Conductor Style: Spiral core. Length: Approximately 8 length end to end. Low resistance: 40-50 ohms per foot. To fit LS3 engine type only. Will not fit any other engine type.
VF Holden Commodore & HSV LS3 6.2lt V8 8.5mm Aeroflow Black Ignition Leads New
Spark-Plugs-Leads-for-Holden-HSV-LS2-LS3-L76-L77-L98-6-0L-6-2L-V8-VZ-VE-VF-01-er

Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF

Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF

Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Brand new, genuine NGK. Ignition wire set for all Holden and HSV LS2, LS3, LS7, L76, L77, L98, 6.0, 6.2, 7.0L V8 motors. Compatible with NGK RC-HLK816S. Latest technology in spark plugs. Compatible with OEM applications. NGK Laser Iridium IZTR5B11. NGK Laser Platinum PZTR5A-15. NGK Laser Platinum PTR5D-10. NGK Iridium IX TR5IX. NGK V-Power TR5; and. DENSO IT16, IT16TT, VT16. If unsure of fit message with your rego & state, or exact make and model and we will confirm. About Ruthenium HX Spark Plugs. Please see listing photos for comparison of Ruthenium HX spark plugs vs existing technologies. NGK Spark Plugs is introducing the latest technology in high ignitability spark plugs to the automotive aftermarket: NGK Ruthenium HXT. Ruthenium HXT spark plugs. The ultimate high ignitability spark plugs from NGK. Modern engines demand spark plugs that provide top performance while enduring the most severe conditions. NGK Ruthenium technology provides maximum durability and performance in newer engines where greater ignition efficiency is demanded. Modern engine designs utilize advanced technologies to create more power with less fuel. This results in greater heat and pressure in the combustion chamber, which shortens the life the spark plug. In response, NGK created Ruthenium HXT, a high ignitability spark plug with outstanding service life. Patented high ignitability DFE and PSPE tip designs provide the most efficient and complete fuel burn of any aftermarket plug, resulting in quicker throttle response, smoother idle and better cold starts. NGK’s Ruthenium alloy technology provides superior oxidation resistance, delivering unparalleled durability and outstanding service life. Patented OEM designs meet the demands of modern high heat engines. Ruthenium HXT contains all the features that enthusiasts expect from NGK spark plugs, including a high grade alumina silicate ceramic, trivalent plated, cold rolled threads, and the highest quality manufacturing and testing. About NGK Wire Sets. NGK is the Ignition Specialist with more OE expertise globally than any other brand. With over 80 years of automotive experience, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NGK wire sets have a high density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength. They provide superior firing and fuel savings, outstanding durability, excellent noise suppression, and consistent performance. Constructed with stainless steel terminals and a silicone seal at the spark plug boot. Fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit. Each NGK ignition wire is fitted with a positive locking, corrosion resistant stainless steel terminal end for tight fit and maximum resistance to vibration and separation. These products are direct-imported from an authorised NGK supplier in the USA. Domestic buyers are also protected by Australian consumer law.
Spark Plugs & Leads for Holden HSV LS2 LS3 L76 L77 L98 6.0L 6.2L V8 VZ VE VF
Spark-Plugs-Leads-for-Holden-HSV-LS2-L76-L77-L98-LS3-6-0L-6-2L-V8-VZ-VE-VF-01-hn

Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF

Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF

Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Brand new, genuine NGK. Ignition wire set for all Holden and HSV LS2, LS3, LS7, L76, L77, L98, 6.0, 6.2, 7.0L V8 motors. Compatible with NGK RC-HLK816S. Does not include aluminium heat-shields. Latest technology in spark plugs. Compatible with OEM applications. NGK Laser Iridium IZTR5B11. NGK Laser Platinum PZTR5A-15. NGK Laser Platinum PTR5D-10. NGK Iridium IX TR5IX. NGK V-Power TR5; and. DENSO IT16, IT16TT, VT16. If unsure of fit message with your rego & state, or exact make and model and we will confirm. About Ruthenium HX Spark Plugs. Please see listing photos for comparison of Ruthenium HX spark plugs vs existing technologies. NGK Spark Plugs is introducing the latest technology in high ignitability spark plugs to the automotive aftermarket: NGK Ruthenium HXT. Ruthenium HXT spark plugs. The ultimate high ignitability spark plugs from NGK. Modern engines demand spark plugs that provide top performance while enduring the most severe conditions. NGK Ruthenium technology provides maximum durability and performance in newer engines where greater ignition efficiency is demanded. Modern engine designs utilize advanced technologies to create more power with less fuel. This results in greater heat and pressure in the combustion chamber, which shortens the life the spark plug. In response, NGK created Ruthenium HXT, a high ignitability spark plug with outstanding service life. Patented high ignitability DFE and PSPE tip designs provide the most efficient and complete fuel burn of any aftermarket plug, resulting in quicker throttle response, smoother idle and better cold starts. NGK’s Ruthenium alloy technology provides superior oxidation resistance, delivering unparalleled durability and outstanding service life. Patented OEM designs meet the demands of modern high heat engines. Ruthenium HXT contains all the features that enthusiasts expect from NGK spark plugs, including a high grade alumina silicate ceramic, trivalent plated, cold rolled threads, and the highest quality manufacturing and testing. About NGK Wire Sets. NGK is the Ignition Specialist with more OE expertise globally than any other brand. With over 80 years of automotive experience, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NGK wire sets have a high density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength. They provide superior firing and fuel savings, outstanding durability, excellent noise suppression, and consistent performance. Constructed with stainless steel terminals and a silicone seal at the spark plug boot. Fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit. Each NGK ignition wire is fitted with a positive locking, corrosion resistant stainless steel terminal end for tight fit and maximum resistance to vibration and separation. These products are direct-imported from an authorised NGK supplier in the USA. Domestic buyers are also protected by Australian consumer law.
Spark Plugs & Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Race-Spark-Plug-Leads-for-Holden-HSV-LS1-5-7L-V8-Commodore-Calais-VT-VU-VX-VY-VZ-01-pxaj

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
Colour: YELLOW, also available in BLUE. Lowest resistance of any wire – Made in the USA. Brand new, genuine B&B OML race performance ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. Comes with a packet of dielectric grease. About B&B OML: The Platinum Racing Wire Sets. B&B Platinum Racing Wires deliver ultimate electric performance through the best conductor ever made. They are engineered with a double pure silicone insulation braided for added pull strength and a Ferro spiral conductor with a low resistance impregnated core, which creates an outstanding RFI choke suppression. Wires are wound tighter for the lowest resistance available in the market (25 ohms per foot resistance). Best choice for both race and street applications. Extra thick 10mm diameter; and. Outer silicone jacket available in bright colors: blue, red and yellow. This wire set is direct-imported from an authorised B&B supplier in the USA. Buyers are also protected by Australian consumer law.
Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ
Denso-Spark-Plug-Leads-for-Holden-HSV-LS2-L76-L77-L98-LS3-6-0L-6-2L-V8-VZ-VE-VF-01-wrvr

Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF

Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF

Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF
Brand new, genuine Denso ignition wire set for all Holden and HSV LS2, LS3, LS7, L76, L77, L98, LSA, 6.0, 6.2, 7.0L V8 motors. Compatible with NGK RC-HLK816S. Does not include aluminium heat-shields. About Denso Wire Sets. Identical in fit, colour, form, and performance to the original, factory-installed wire set, DENSO ignition wire sets fit right, look right, and work perfectly. Many replacement ignition wire sets are a disappointment: they require too much work to install and don’t produce a quality job. DENSO First Time Fit® wire sets will put the enjoyment back into your weekend tune-up projects. All-Silicone Wires: These ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40° to 428° F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing. Pre-cut to Exact Lengths: Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. This allows the installer to “feel and hear” that a solid connection has been made, even when the connection is in a difficult-to-see location. Strong Connections: Through a patented process, the terminals are attached to provide an extremely strong connection ensuring the cable and boot will not separate during removal and installation. High temperature “Class E” silicone jacket to withstand heat, cold, chemicals and moisture. Reinforcing member for added strength and terminal retention. Silicone insulation for superior dielectric and heat performance. Conductive silicon layer for high temperature performance and EMI/RFI noise suppression. Fiberglass braid for maximum strength. Carbon impregnated fiberglass core for superior support conductivity. Core reinforced with KEVLAR®. Layer impregnated with Ferrite. Wire-wound layer to suppress EMI/RFI noise. This wire set is direct-imported from an authorised Denso supplier in the USA. Buyers are also protected by Australian consumer law.
Denso Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF