Tag Archives: suspension

K-SPORT-ADJUSTABLE-COILOVER-suspension-KIT-FIT-HOLDEN-COMMODORE-VE-HSV-INC-UTE-01-kys

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
PERFORMANCE + COMFORTABLE KIT. 999AUTOSHOP IS NOT a “ONLINE ONLY” COMPANY, WE HAVE SHOWROOM/WORKSHOP IN SYDNEY + BRISBANE AUSTRALIA, WE CAN ALWAYS HELP OUR CUSTOMER FOR INSTALLATION OR ALL THE SUPPORT! Fully adjustable suspension kit with 36 levels of dampening and rebound, plus fully height adjustable. Easy installation and ride height adjustment. High Tolerance Springs. Installation Note: âââ¬Ã¢ When installing this product, the operator shall wear gloves to avoid the risk of hand injury. The upper holder used in this shock must be K-Sport’s original component. This shock absorbers may not be compatible with the upper holder of other brands. âââ¬Ã¢ K-Sport shall not take any liability for damage to the shock or accidents that are caused by connecting the upper holder of other brands with this shock. âââ¬Ã¢ Be sure to observe local relevant vehicle regulations about usage of adjustable shock absorbers. (For example, height limit, headlight ground clearance limit) âââ¬Ã¢ K-Sport shall hold no liability for any violation against local vehicle regulations or laws. âââ¬Ã¢ According to the installation instructions, avoid uneven road surface and driving at low speed. âââ¬Ã¢ Ensure that components of the product are not loosened or oil is not leaking. âââ¬Ã¢ Tighten all components with specified torque periodically. âââ¬Ã¢ When a suitable height is determined it shall be tested and calibrated on straight line. âââ¬Ã¢ The vehicle should go to a specified workshop or a commissioned vehicle calibration center to adjust the calibration. Technical The damping setting and spring rate for this product is different from the vehicle’s original shock absorbers. Any shock absorbers can be disassembled completely to change the damping setting. Disassembling the shock absorber also offers a chance for inspection and service to the shock. However, disassembling of the shock absorbers can only be performed by K-Sport’s certified professional technicians. BANK DETAIL : – NAB. Although we will try our best to amend order details if necessary, we cannot guarantee that it can be done. We are more than happy to assist you. The item “K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE” is in sale since Tuesday, October 22, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Other”. The seller is “999autoshop” and is located in Epping, NSW. This item can be shipped worldwide.
  • Manufacturer Part Number: ksxxxx(16658)
  • Brand: k sport
  • Item Picture: NOT the Actual Item (For Reference Only)
  • MPN: ksxxxx(16658)
  • Return Postage Charges: Buyer will pay for any return postage

K-SPORT ADJUSTABLE COILOVER suspension KIT FIT HOLDEN COMMODORE VE HSV INC UTE
SUPERPRO-Holden-Commodore-VE-SUPER-PRO-Front-Suspension-Bush-Kit-V6-V8-HSV-01-tvx

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV
SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV. HOLDEN COMMODORE VE MODELS. Lower Control Arm INNER Bushes SPF2862K. Caster Rod bushes (STRUT BAR TO CHASSIS MOUNT BUSH SPF2858K). Top Strut Mounts SPF1590K. Sway Bar Mount Bushes SPF-2863_ _K. The specially blended Polyurethane used in SuperPro products has specific mechanical properties that make it extremely successful in its applications. The combined properties of extreme resistance to abrasion, low compression set, high tear strength, and a resistance to oils and solvents makes SuperPro ideal for most automotive applications. These properties lead to a resilient product that is highly versatile in its various applications. Knurling is used to enable unrestricted pivoting of the polyurethane bush around the crush tube or any other mating steel surfaces. The knurling has inherent design advantages – reducing the surface area of polyurethane in contact with the crush tube, which results in less frictional force being developed. The design of the SuperPro knurl bore combined with the integral grease retention lips, keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing. Bullet grooves are incorporated in the design of SuperPro bushes to allow for variances in control arm or spring eyes. The voiding and bullet grooves also allow for the transgression of displaced polyurethane into the volume of the grooves as the loads of normal vehicle operation are applied. Even though polyurethane is in a solid form when it is manufactured into bushes, its unique properties enable it flow in a manner similar to a liquid when loaded. The action of the bush flowing into its voids prevents the generation of noise, vibration and harshness within the bush and its mount. The tangential grease grooves in the heads of shackle bushes reduce the friction between the head of the bush and the shackle plates. The grooves store grease, which is smeared around the mating surfaces when the spring shackles rotate, forming a lubrication boundary layer. This has the effect of minimising head friction and reducing noise. The Research and Development process for SuperPro products constantly gathers information and feedback to provide continuous product improvements. Superpro constantly re-engineers and tests its products on their own fleet of passenger vehicles and Four Wheel Drives. Cyclic testing is performed using specifically designed testing equipment, to offer valuable information on the life and durability of SuperPro products. Australia’s diversely unique conditions provide the perfect testing ground for SuperPro products. Encompassing everything from extreme heat, dust, and harsh roads to race circuits, rally tracks, speedways and drag strips, SuperPro products are extensively tested in a variety of conditions to ensure the highest quality performance and reliability. SuperPro products are also further tested in the diverse climates of Africa, Asia, Australasia, Europe, Middle East, South Pacific, UK and USA. The item “SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV” is in sale since Tuesday, March 19, 2013. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Shocks, Struts”. The seller is “automotiveonline2012″ and is located in BRISBANE, Queensland. This item can be shipped worldwide.
  • Manufacturer Part Number: SPF-VE-F-KIT
  • Brand: SUPER PRO

SUPERPRO Holden Commodore VE SUPER PRO Front Suspension Bush Kit V6 V8 HSV
BOSS-FRONT-Air-Bag-Suspension-kit-Holden-Commodore-HSV-Club-Sport-SS-R8-01-wm

BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8

BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8

BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
This is a brand new pair of BOSS air bag over strut suspension kit to suit front of Commodore. All model commodores except VE. From way back in VR days to current. This is for 2 x struts so you can do both sides. These are a direct replacement of your old struts. There are no modifications required to the car and they can be readily removed and conventional struts can go straight back in, for what ever reason. The strut is 12 way adjustable so you can choose a soft rebound (bounce) or a firm sporty ride (no bounce). The bag can be run at what ever pressure you desire. Soft (say 15-20 psi) will be like riding on a pillow and it will be low to the ground. You can add more air and have a more firm ride and it will be higher off the ground. There’s no limit to what the bags can take as they can withstand hundreds of psi and many tonnes of weight. We run these bags in commercial vehicles too remember. If you get one of our in cab kits as well you can pump them up from inside the car. If you like the low look but cant get up driveways then pump them up when needed and you can get heights even taller than standard suspension. These come with out patented bell tops for mounting the top of the strut to your car. These are adjustable and have a swivel bearing to accommodate tilt and varying lean. Has heavy duty air lines (hydraulic line) for near the wheel where conditions are harsh. But also have poly line with push connect fittings and valves so you can manually inflate the bags with a tyre valve for each. That way you could get these in and operational before you get around to running a compressor and tank for in car control at a later stage. We can help with all that gear too. The bags are our ever popular and common 2500 series bag. It is tried and tested in over 20,000 vehicles and they date back 15+ years and still going. So rest assured the bags are proven to be the best and can be readily replaced if needed. What you do need to do is cut the old mount off the bottom of your old strut and weld it to the bottom of these struts. The struts are mild steel untreated and unpained for ease of welding. A home welder is good enough. Also might pay to transfer the brake line bracket to the new strut in the same fashion. But that’s all there is by way of fabricating. Note you can slide the bottom mount up and down the new strut to a position you like before welding and that can accommodate the super low needs or a taller ride. How low does it go? You can sit the car on the ground if you want. Before you get that low you will find the car will sit on the tyres first. How high does it go? You can lift the front. Of the car to 2.0 taller than standard. Perfect for clearing steep driveways. Can they carry heavy loads? You can run at what ever height you want with even the heaviest loads. Mind you the front doesnt have much of a variable load. Anyway, the bags are up for it. You can carry whatever load you want at what ever height you want. Just add more air to get more height. Can I drift or drag with these? – yes we get asked that and yes you can. And when its time to drive home, clear speed humps or get it up onto a trailer just pump the bags up. Oh and yes it is like driving on pillow soft air. For a very soft ride just run low pressures. For a stiff firm ride just ride with higher pressures. Depends if you have IRS, leaf or live axle coil. We do them all except VE rear struts at this stage. The kit is complete. Bell Top brackets for top. 12 Way adustable Struts. Air Bags with fastening bolts and washers. Air Lines – Heavy Duty for wheel area plus poly line to valves. Air Fittings and valves for air lines. Easy to follow instructions with pics. Are the bags strong – absolutely. The thickness and toughness of these bags is somewhat heavier than the sidewalls of your tyres. Your tyres are running along the ground a lot more exposed to sticks and rocks than your air bags, and the bags are heavier. We just dont get bags sustaining damage. You can put that fear to rest. We can also do tanks for tyres or digital displays. Lets quickly kick a few goals.. Normal operating pressures are just like your tyres – 25 psi to 50 psi for normal descent loads. The rubber in our BOSS bags is heavier than the rubber in your tyres. They never get damaged by stones or sticks. You can carry what ever load you want at what ever height you want, even if the car is normally lowered. Individual components like a bag are all replaceable. We are Australian and now have over 25,000 customers all over Aus. We do virtually every Ute, 4WD or Van and pride ourselves in not copying others. We speak with roo shooters, caravaners, tradies, farmers and alike all over Aus all day everyday. We also look after workshops and resellers. We are here to help. The steel brackets are laser cut, mig welded and powder coated black with the appropriate preparations for best adhesion and anti corrosion. We are phasing out the electroplating. Powder coating looks better, lasts longer and the process is better for the environment. The kit exceeds Australian Design Rule (ADR) standards. Any old air compressor will pump these up. Could be at a servo, a workshop compressor or a 12V cig lighter compressor. But it’s really cool to mount a compressor and air tank on board so you can adjust your air bags with the flick of a switch. See below for in cab options. Note the in cab kits below are traditionally for 2 x bags but for a little extra we can work out a great price to do all 4 bags if you get bags for the front as well. We have 3 In Car Kits to choose from… PX01 In Cab is our newest and now most popular. PX02 is same as PX01 but with our larger PX02 compressor.. Our PX07 In Cab Kit is the most comprehensive with our big PX07 compressor and tank also great for pumping tyres, running air horns and tools.. With this upgrade we take out the twin needle gauge and the 2 manual dump valves and replace them with the following.. 1 x LED Digitial Gauge – twin read out. 1 x Mounting plate. 2 x air down electric solenoids with 1/4 T-piece. 2 x push button switches to activate the solenoids. 2 x sender units with 1/4 T-piece. All of our gear may be picked up from our official BOSS development center in Labrador on the Gold Coast or we can send anywhere in Aus (or with express options) or Worldwide at affordable rates. Almost every air bag application we do is bolt in. No welding or cutting or drilling. We make that a mandatory requirement when we develop a new kit. And we will make sure we do better. We wont be beaten on price, quality or service. Happy customers is our key to success. People often ask why or how are we so much cheaper than Firestone. So our costs are way down and if we charged Firestone prices we would be ripping you off. Our bags are not permanently attached to the mounting brackets. That means you can replace a bag if you have to without the costly new brackets as well. No need for qualified installers, anyone can fit our gear, its easy and there’s no crazy ideas of how long 5 years is. The way we see it, if you are happy you will tell your friends and our next customer could be one of your mates. So even in 15 years we are still going to look after you. It’s how we roll. I sell brackets and bags individually to people who change cars or need spares. Consider this – there are over 15,000 BOSS kits out there in Australia alone. That’s 30,000 air bags. I sell replacement bags at a rate of about 4 bags per month. That tells us the bags are lasting a very long time and just not wearing out. Of course they can and they save heaps. Sometimes they just need new top brackets. We talk with farmers, tradies and travelers every day about their load carrying and air system needs and we take pride in making our mark on Australia. We have been doing air suspension for over 15 years and have over 20,000 Aussie customers out there running BOSS air suspension products. Over the years we make improvements where we can and so by now we have become a market leader recognised for having the best product at the best prices. BOSS also have a development center in Canada looking after our Canadian and American interests. We have a lot of exciting vehicle applications in the USA that eventually filter through to Australia and other parts of the world and so we have a very extensive range which includes all the American pick ups as well as the old classic cars like Chev and Buick. At BOSS we dont copy others – To begin with we dont trust the others to get it right. But more importantly the others dont have anything to copy. BOSS are the first to get hold of new vehicle models and get kits to market having tried and tested them, fully getting to understand the vehicle and the engineering required. As such BOSS have the widest range of applications for Australian and USA markets and we are onto all the new models even before they are released. Also other brands seem content with drilling chassis rails. Sure it means less kits fit more vehicles but no one wants to compromise their vehicle so we put in that extra bit of attention and the results are in the bag. BOSS have the most comprehensively wide range of accessories as well. All of our air compressors can be rebuilt and we stock those parts. We have tanks, pressure switches, water filters, braided lines, digital pressure gauges, everything for in car operation of your bags, the list goes on and on. BOSS air bags are manufactured in our BOSS factory with our own machines to our own exacting standards and specifications. We strongly believe it’s the only way of maintaining strict control over the bags. Here are some interesting facts… It takes over 20 minutes for each bag to go from the raw un-cured blended rubber to a cured air bag. 1 machine can only make 1 bag at a time. Its not just the thickness of the rubber that gives the bag its strength but also the angle of the reinforcing cords and design of the woven beads. The proprietary ballistic material used for the woven reinforcing on the airbag wall, along with the specific spacing and angle of the weave, is what gives our air bag its unique strength. The bead ring ends of the bag are constructed of 4 Hi-tensile cords at each end, ensuring that the top and bottom hold their shape and cant be pulled away from the Aluminium clamping ring. The center of the air bag (the part of the bag with the most stress) is constructed using 9 strands of Hi-Tensile steel to form an indestructible center support. Our competitors’s bags have less than half these strands. The BOSS airbag machines are operated at over 400psi while the curing process is taking place with very high heat. There’s an internal bladder pushing the airbag case into the mould ensuring consistency throughout the airbag wall. Each air bag machine has over 50 tons of clamping pressure on the mold during curing. Effectively these are desperately over engineered as there’s no way you could ever exert over 50t and 400 psi on a bag in your vehicle. The factory tests selected bags to destruction within a controlled chamber to ensure continued bag quality and identify possible ways to constantly improve the design and technique. We have just recently released the exciting new EX-2 Bags. They have a 5 year leak free guarantee. Tooling was modified to provide for a heavier and wider rim width. BEWARE: Some other brands use crimped-on end caps. Crimped or Banded air bags are prone to popping the end caps out at anything over 100psi and often simply pull the end caps out when the bag is fully extended. BOSS air bags are undeniably the strongest in the automotive industry and exceed any other air bag brands by nearly double. Ver 100 different air bag leaf and coil load assist kits. BOSS does coil replacements kits. BOSS does air struts. BOSS does full air suspension systems. BOSS does package deals with different in cab and compressor options. BOSS does Coil O. Ver struts with coils. BOSS does Shock Absorbers. And of course, BOSS does air suspension for Harley Davidson bikes… So you see BOSS is 100% focussed and committed to delivering all the best gear. Here is a selection of our other popular accessories and add ons. Like we said, no one else offers such a huge list of optional bits. Ride like a BOSS. The item “BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8″ is in sale since Sunday, December 25, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Labrador, QLD. This item can be shipped worldwide.
  • Brand: BOSS
  • Manufacturer Part Number: BOSS Bag Over Strut Commodore

BOSS FRONT Air Bag Suspension kit Holden Commodore HSV Club Sport SS R8
LA19-Holden-Commodore-VT-VU-VX-VY-VZ-SS-HSV-Ute-Sedan-Wagon-Air-Rear-Suspension-01-npe

LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension

LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension

LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension
This is a brand new BOSS air bag suspension kit to suit. IRS Commodore or Statesman rear – coil replacement. If you have Independent Rear Suspension in a commodore (any model) or statesman (any model) then this kit will fit straight in. But not IRS or Coil Live rear – here are the links to those.. IRS Drop In (LA19). We do not yet have a kit for VE with struts. This is our “Drop In” Kit. It really is as simple as undoing the bottom mount of the rear shocks, lifting the car and the coils fall out, drop these in and lower the car so you can do up the shock again. That’s why they are called “Drop In”. No need to do anything else to the car. How low does it go? You retain the bump stops and we need about 1.5 for bags and brackets. So you can test this by taking out your coils and lower the car onto its bump stops. Then lift it by 1.5 and that’s where it will sit with the bags deflated. In most cases the car will be resting on the tyres. How high does it go? You can lift the rear of the car to 2.0 taller than standard. Perfect for clearing steep driveways. Can they carry heavy loads? You can run at what ever height you want with even the heaviest loads. If you are towing a very heavy trailer, have a ute loaded up with bags of cement or filled the back seat with overweight free-loaders – it doesn’t matter. The bags can carry 8-10 ton which is a bit more than the rest of your car wants you to carry. The bags are up for it. You can carry whatever load you want at what ever height you want. Just add more air to get more height. It means you can shift weight forward on a trailer for a safer ride and the car can take the weight. Can I drift or drag with these? – yes we get asked that and yes you can. And when its time to drive home, clear speed humps or get it up onto a trailer just pump the bags up. Oh and yes it is like driving on pillow soft air. For a very soft ride just run low pressures. For a stiff firm ride just ride with higher pressures. Your IRS rear does have bump stops inside your coils. Big dimple looking things fatter than your thumb. The top bracket of this kit uses that bump stop to locate the bag in the same manner it located your old coil spring. This kit will allow you to drop the car low enough so that you are literally at bump stop height plus about 1.5. We also do a different “Bolt In” kit that. Lets you go even lower than bump stop height. Hat requires you to cut the bump stops out with a grinder and bolt the top and bottom brackets in (need to drill holes). With the bolt in kit you can sit the car on the ground. But then you cant go back to coils unless you weld the bump stop back in. So for the really radical “dump it” cars we can still help with the “Bolt In” kit. With regard to the fronts we have bag struts. To discuss fronts and whether you are running in car controls etc. The kit is complete. Brackets top and bottom. Air Bags x 2 (1 for each side). Air Fittings for air lines. Easy to follow instructions with pics. Are they strong – absolutely. The thickness and toughness of these bags is somewhat heavier than the sidewalls of your tyres. Your tyres are running along the ground a lot more exposed to sticks and rocks than your air bags, and the bags are heavier. We just dont get bags sustaining damage. You can put that fear to rest. If you carry heavy loads at all you should consider heavier springs of some sort. But the problem with heavier springs is that when you don’t have a load they are rock hard and not only does it feel terrible but the car handles poorly. If your load varies you need soft suspension when you don’t carry a load and heavy suspension when you do have a load. Cant manage that with heavier coil springs. The only real way to achieve this is with air bags just like those in trucks and buses. With a BOSS Air Bag Load Assist kit you can run them soft when you are running light weight without a load and its just like floating on air – funny that. Then just pump them up when you load up. The heavier the load the more air you can apply. Ealistically you only need 20 to 40 psi for normal loads and maybe 80 psi with extreme loads but the bags are tested to 400 psi and 50 tonnes of compress pressure per bag in manufacture. You could say the bags are over engineered and capable of exceeding your load carrying expectations by a long way. We can also do tanks for tyres or digital displays. We also sell a kit for the front of commodore and statesman. Lets quickly kick a few goals.. You can run these flat and they will be ok. Normal operating pressures are just like your tyres – 25 psi to 50 psi for normal descent loads. The rubber in our BOSS bags is heavier than the rubber in your tyres. They never get damaged by stones or sticks. You can carry what ever load you want at what ever height you want, even if the car is normally lowered. Load up more weight on the tow ball by shifting trailer weights forward and have a safer ride. Individual components like a bag are all replaceable. No drilling welding or cutting – a normal socket set is all you need. We are Australian and now have over 25,000 customers all over Aus. We do virtually every Ute, 4WD or Van and pride ourselves in not copying others. We speak with roo shooters, caravaners, tradies, farmers and alike all over Aus all day everyday. We also look after workshops and resellers. We are here to help. The steel brackets are laser cut, mig welded and powder coated black with the appropriate preparations for best adhesion and anti corrosion. We are phasing out the electroplating. Powder coating looks better, lasts longer and the process is better for the environment. The kit exceeds Australian Design Rule (ADR) standards. Essentially you can lift the rear of the vehicle with air bags to level when otherwise sagging in the rear. You can avoid your headlights blinding oncoming drivers when your rear end sags. Shocks, tyres and leaf springs will last longer too. If you are towing you can now shift more weight forward on the trailer or in the caravan and that makes for a much safer and steady ride. RACV, RACQ, NRMA, AAMI for example are all happy with our bag options. Any old air compressor will pump these up. Could be at a servo, a workshop compressor or a 12V cig lighter compressor. But it’s really cool to mount a compressor and air tank on board so you can adjust your air bags with the flick of a switch. See below for in cab options. Note the in cab kits below are traditionally for 2 x bags but for a little extra we can work out a great price to do all 4 bags if you get bags for the front as well. We have 3 In Car Kits to choose from… PX01 In Cab is our newest and now most popular. PX02 is same as PX01 but with our larger PX02 compressor.. Our PX07 In Cab Kit is the most comprehensive with our big PX07 compressor and tank also great for pumping tyres, running air horns and tools.. And with each of these kits we can upgrade to fully electronic with LED digital display and electric valves and apart from looking really great also eliminates the need for running air lines inside the car.. With this upgrade we take out the twin needle gauge and the 2 manual dump valves and replace them with the following.. 1 x LED Digital Gauge – twin read out. 1 x Mounting plate. 2 x air down electric solenoids with 1/4 T-piece. 2 x push button switches to activate the solenoids. 2 x sender units with 1/4 T-piece. All of our gear may be picked up from our official BOSS development center in Labrador on the Gold Coast or we can send anywhere in Aus (or with express options) or Worldwide at affordable rates. Almost every air bag application we do is bolt in. No welding or cutting or drilling. We make that a mandatory requirement when we develop a new kit. And we will make sure we do better. We wont be beaten on price, quality or service. Happy customers is our key to success. People often ask why or how are we so much cheaper than Firestone. So our costs are way down and if we charged Firestone prices we would be ripping you off. Our bags are not permanently attached to the mounting brackets. That means you can replace a bag if you have to without the costly new brackets as well. No need for qualified installers, anyone can fit our gear, its easy and there’s no crazy ideas of how long 5 years is. The way we see it, if you are happy you will tell your friends and our next customer could be one of your mates. So even in 15 years we are still going to look after you. It’s how we roll. I sell brackets and bags individually to people who change cars or need spares. Consider this – there are over 15,000 BOSS kits out there in Australia alone. That’s 30,000 air bags. I sell replacement bags at a rate of about 4 bags per month. That tells us the bags are lasting a very long time and just not wearing out. Of course they can and they save heaps. Sometimes they just need new top brackets. We talk with farmers, tradies and travelers every day about their load carrying and air system needs and we take pride in making our mark on Australia. We have been doing air suspension for over 15 years and have over 20,000 Aussie customers out there running BOSS air suspension products. Over the years we make improvements where we can and so by now we have become a market leader recognised for having the best product at the best prices. BOSS also have a development center in Canada looking after our Canadian and American interests. We have a lot of exciting vehicle applications in the USA that eventually filter through to Australia and other parts of the world and so we have a very extensive range which includes all the American pick ups as well as the old classic cars like Chev and Buick. At BOSS we dont copy others – To begin with we dont trust the others to get it right. But more importantly the others dont have anything to copy. BOSS are the first to get hold of new vehicle models and get kits to market having tried and tested them, fully getting to understand the vehicle and the engineering required. As such BOSS have the widest range of applications for Australian and USA markets and we are onto all the new models even before they are released. Also other brands seem content with drilling chassis rails. Sure it means less kits fit more vehicles but no one wants to compromise their vehicle so we put in that extra bit of attention and the results are in the bag. BOSS have the most comprehensively wide range of accessories as well. All of our air compressors can be rebuilt and we stock those parts. We have tanks, pressure switches, water filters, braided lines, digital pressure gauges, everything for in car operation of your bags, the list goes on and on. BOSS air bags are manufactured in our BOSS factory with our own machines to our own exacting standards and specifications. We strongly believe it’s the only way of maintaining strict control over the bags. Here are some interesting facts… It takes over 20 minutes for each bag to go from the raw un-cured blended rubber to a cured air bag. 1 machine can only make 1 bag at a time. Its not just the thickness of the rubber that gives the bag its strength but also the angle of the reinforcing cords and design of the woven beads. The proprietary ballistic material used for the woven reinforcing on the airbag wall, along with the specific spacing and angle of the weave, is what gives our air bag its unique strength. The bead ring ends of the bag are constructed of 4 Hi-tensile cords at each end, ensuring that the top and bottom hold their shape and cant be pulled away from the Aluminium clamping ring. The center of the air bag (the part of the bag with the most stress) is constructed using 9 strands of Hi-Tensile steel to form an indestructible center support. Our competitors’s bags have less than half these strands. The BOSS airbag machines are operated at over 400psi while the curing process is taking place with very high heat. There’s an internal bladder pushing the airbag case into the mould ensuring consistency throughout the airbag wall. Each air bag machine has over 50 tons of clamping pressure on the mold during curing. Effectively these are desperately over engineered as there’s no way you could ever exert over 50t and 400 psi on a bag in your vehicle. The factory tests selected bags to destruction within a controlled chamber to ensure continued bag quality and identify possible ways to constantly improve the design and technique. We have just recently released the exciting new EX-2 Bags. They have a 5 year leak free guarantee. Tooling was modified to provide for a heavier and wider rim width. BEWARE: Some other brands use crimped-on end caps. Crimped or Banded air bags are prone to popping the end caps out at anything over 100psi and often simply pull the end caps out when the bag is fully extended. BOSS air bags are undeniably the strongest in the automotive industry and exceed any other air bag brands by nearly double. Ver 100 different air bag leaf and coil load assist kits. BOSS does coil replacements kits. BOSS does air struts. BOSS does full air suspension systems. BOSS does package deals with different in cab and compressor options. BOSS does Coil O. Ver struts with coils. BOSS does Shock Absorbers. And of course, BOSS does air suspension for Harley Davidson bikes… So you see BOSS is 100% focussed and committed to delivering all the best gear. There is a selection of our other popular accessories and add ons. Like we said, no one else offers such a huge list of optional bits. Ride like a BOSS. The item “LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension” is in sale since Thursday, April 24, 2014. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Other”. The seller is “air_assist_suspension” and is located in Labrador, QLD. This item can be shipped worldwide.
  • Brand: BOSS
  • Manufacturer Part Number: BOSS LA19 Drop In

LA19 Holden Commodore VT VU VX VY VZ SS HSV Ute Sedan Wagon Air Rear Suspension