Monthly Archives: March 2020

Genuine Momo Sport Jaguar 380mm black leather steering wheel. RARE! 7C

March 15, 2020genuine380mm, black, genuine, jaguar, leather, momo, rare, sport, steering, wheeladmin

GENUINE MOMO JAGUAR LEATHER SPORT STEERING WHEEL. Bella Volante offer for sale this genuine Momo Jaguar Sport steering wheel, made in Italy in 1990. HORN BUTTON: Included within spokes. HUB KIT: Not included… This wheel will fit any hub kit with a 70mm PCD, such as Momo, OMP, Sparco, Italvolanti, Simoni and more. We can also supply an additional slim-line adapter to allow the wheel to fit a 74mm PCD hub kit, including Nardi. The leather is still soft and supple with light wear and just a few minor marks commensurate with age and use. The stitching is complete and tight throughout. The seams are straight and true. The horn buttons are confirmed working. There are 6 new screws included. PLEASE STUDY THE PHOTOGRAPHS CAREFULLY, THIS IS THE EXACT ITEM YOU SHALL RECEIVE. Where you’ll find a huge range of steering wheels, hub kits and horn buttons by Momo, Nardi, OMP, Sparco, Italvolanti, Atiwe, Raid, Personal, Porsche, BMW, VW, Ferrari, Ford and more. Buyers outside of the European Union… The item “Genuine Momo Sport Jaguar 380mm black leather steering wheel. RARE! 7C” is in sale since Friday, September 6, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Steering Wheels”. The seller is “bellavolante” and is located in Bury, Lancashire. This item can be shipped worldwide.

Colour: Black
Country/Region of Manufacture: Italy
Material: Leather
Features: Horn Controls
Manufacturer Part Number: Ghibli
Classic Car Part: Yes
Finish: Leather
Reference OE/OEM Number: VOLANTE
Brand: Momo

SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV

March 14, 2020superprocommodore, enhancement, holden, statsmen, superpro, vehicleadmin

Please make sure this fits. Front Control Arm Lower-Inner Bush Kit. Front Strut Bar To Chassis Mount Bush Kit. Rear Control Arm Lower-Inner Bush Kit. Rear Control Arm Lower-Outer Bush Kit. Rear Control Arm Upper-Inner Rear Bush Kit. Rear Toe Control Arm Inner Bush Kit. Rear Trailing Arm Bush Kit. Axle alignment required after fitting. Fitting Position : Front and Rear. International (outside Australia) EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SUPERPRO Vehicle Enhancement Kit for HOLDEN COMMODORE VE STATSMEN WM HSV” is in sale since Monday, March 14, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Control Arms”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.

Manufacturer Part Number: KIT175K
Brand: SUPERPRO

Ve V8 Orssom Otr Mafless Kit Bundle With Infill Panel Holden Commodore Hsv 11-13

March 14, 2020orssom11-13, bundle, commodore, holden, infill, mafless, orssom, paneladmin

ORSSOM PERFORMANCE GENAIRATION4 OTR (OVER THE RADIATOR) COLD AIR INTAKE KIT. FULL BUNDLE WITH OTR KIT & AIRBOX INFILL PANEL. SUITABLE FOR VE V8 LS3, L98, L76 HOLDEN COMMODORE & HSV – MAFLESS. SUIT VE MODELS BUILT SEPT 2011 – UP TO 2013. FOR AUG 2011 & EARLIER PLEASE SEE OUR OTHER LISTINGS. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VE Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! This bundle also includes an Inner Guard Infill Panel, giving your engine bay that finishing touch! Upon removing your Factory Intake System, you are left with an un-sightly gap exposing the inner plastic wheel arch. Easily fits in minutes! What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. Intake Air Temp (IAT) Sensor. IAT Sensor wiring extension harness. The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VE Commodore Sept 2011 – Up to 2013. For vehicles built Aug 2011 and earlier please see our other listings. MAFLESS tune is required. This kit is supplied complete with the Intake Air Temp (IAT) Sensor & wiring extension harness. You will need to drill a hole into the OTR for fitting of this. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid. Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake! Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! A huge range of different installations, induction sound vids and dyno results can be found on the Orssom youtube channel, but here are just a few Orssom samples below! The item “VE V8 ORSSOM OTR MAFLESS KIT BUNDLE WITH INFILL PANEL HOLDEN COMMODORE HSV 11-13″ is in sale since Saturday, March 7, 2015. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Orssom Performance
Manufacturer Part Number: Does Not Apply

Vn Vp Vg Vq Dash Cluster Surround Holden Commodore Hsv Complete Lexcen Good Nick

March 13, 2020dashcluster, commodore, complete, dash, good, holden, lexcen, nick, surroundadmin

COMES AS SHOWN IN VERY GOOD NICK. ONLY 80 000KMS ON VEHICLE!! The item “VN VP VG VQ DASH CLUSTER SURROUND HOLDEN COMMODORE HSV COMPLETE LEXCEN GOOD NICK” is in sale since Tuesday, February 19, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “100redhead” and is located in Jannali, NSW. This item can be shipped worldwide.

Brand: Holden
Primary Colour: NA
Colour: NA
Bulb Colour: NA
Manufacturer Part Number: NA

Vf V8 Orssom Otr Mafless Bundle With Infill Panel Holden Commodore & Hsv 6l 6.2l

March 13, 2020orssombundle, commodore, holden, infill, mafless, orssom, paneladmin

ORSSOM PERFORMANCE GENAIRATION4 OTR (OVER THE RADIATOR) COLD AIR INTAKE KIT. FULL BUNDLE WITH OTR KIT & AIRBOX INFILL PANEL. SUITABLE FOR VF V8 6L & 6.2L HOLDEN COMMODORE & HSV – MAFLESS. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VF Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! This bundle also includes an Inner Guard Infill Panel, giving your engine bay that finishing touch! Upon removing your Factory Intake System, you are left with an un-sightly gap exposing the inner plastic wheel arch. What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. Intake Air Temp (IAT) Sensor. IAT Sensor wiring extension harness. The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VF V8 Commodore & HSV. For V6 or VE options, please see our other listings. Not suitable for VF HSV GTS Models. MAFLESS tune is required. This kit is supplied complete with the Intake Air Temp (IAT) Sensor & wiring extension harness. You will need to drill a hole into the OTR for fitting of this. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Please note that as there is some minor variation in this engine bay area in VF Holden & HSV, the infill panels have been made oversized, so that the panel can then be trimmed down to suit each specific model. Infill Panel will need to be trimmed back to suit your specific vehicle. Sit the Infill Panel in place, line up the fitting points and then measure out how much needs to be cut. Cutting to the Infill Panel can be done with a sharp utility knife etc. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid. Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake! Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! A huge range of different installations, induction sound vids and dyno results can be found on the Orssom youtube channel, but here are just a few Orssom samples below! The item “VF V8 ORSSOM OTR MAFLESS BUNDLE WITH INFILL PANEL HOLDEN COMMODORE & HSV 6L 6.2L” is in sale since Saturday, March 7, 2015. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Orssom Performance
Manufacturer Part Number: Does Not Apply

Powerbond 10% OVERDRIVE Pulley Kit FOR Holden Commodore 5.7 LS1 HSV GTO GTS SV

March 12, 2020powerbondcommodore, holden, overdrive, powerbond, pulleyadmin

PK8031 – POWERBOND 8PK SUPERCHARGER CONVERSION KIT – LS1. HOLDEN ADVENTRA 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2003 – OCT 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 235KW, ENGCODE: LS1 GEN III BERLINA 8 RIB POWER PULLEY KIT (PBO81480SC10) JUN 1999 – OCT 2000, 5.7L, V8, 16V, OHV, MPFI, VT, 220KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2000 – SEP 2002, 5.7L, V8, 16V, OHV, MPFI, VX, 225KW, ENGCODE: LS1 GENIII 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 235KW, ENGCODE: LS1 GEN III CALAIS 8 RIB POWER PULLEY KIT (PBO81480SC10) JUN 1999 – OCT 2000, 5.7L, V8, 16V, OHV, MPFI, VT, 220KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2000 – SEP 2002, 5.7L, V8, 16V, OHV, MPFI, VX, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 235KW, ENGCODE: LS1 GEN III CAPRICE 8 RIB POWER PULLEY KIT (PBO81480SC10) MAY 2003 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, WK, 245KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, WKII, 245KW, ENGCODE: LS1 GEN III COMMODORE 8 RIB POWER PULLEY KIT (PBO81480SC10) JUN 1999 – OCT 2000, 5.7L, V8, 16V, OHV, MPFI, VT, 220KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2000 – SEP 2002, 5.7L, V8, 16V, OHV, MPFI, VX, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 245KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 245KW, ENGCODE: LS1 GEN III CREWMAN 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, ENGCODE: GEN III MONARO (NEW) 8 RIB POWER PULLEY KIT (PBO81480SC10) DEC 2001 – DEC 2002, 5.7L, V8, 16V, OHV, MPFI, V2, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) DEC 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, V2, 235KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, V2, 245KW, ENGCODE: LS1 GEN III STATESMAN NEW 8 RIB POWER PULLEY KIT (PBO81480SC10) JUN 1999 – APR 2003, 5.7L, V8, 16V, OHV, MPFI, WH, 220KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) MAY 2003 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, WK, 235KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – AUG 2004, 5.7L, V8, 16V, OHV, MPFI, WKII, 235KW, ENGCODE: LS1 GEN III HSV AVALANCHE 8 RIB POWER PULLEY KIT (PBO81480SC10) DEC 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, VY11, VY II, 270KW, ENGCODE: LS1 GEN III CLUBSPORT 8 RIB POWER PULLEY KIT (PBO81480SC10) JUL 1999 – OCT 2000, 5.7L, V8, 16V, OHV, MPFI, VTII, 250KW, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2000 – OCT 2002, 5.7L, V8, 16V, OHV, MPFI, VX, 255KW, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, ENGCODE: LS1 COUPE GTO 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2003 – JUL 2004, 5.7L, V8, 16V, OHV, MPFI, V3, ENGCODE: LS1 COUPE GTS 8 RIB POWER PULLEY KIT (PBO81480SC10) DEC 2001 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, V2, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, V2, ENGCODE: LS1 GRANGE 8 RIB POWER PULLEY KIT (PBO81480SC10) JUL 1999 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, WH, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2003, 5.7L, V8, 16V, OHV, MPFI, WH, ENGCODE: LS1 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, WK, ENGCODE: LS1 GTS 8 RIB POWER PULLEY KIT (PBO81480SC10) APR 2000 – SEP 2000, 5.7L, V8, 16V, OHV, MPFI, VTII, 300KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2000 – AUG 2001, 5.7L, V8, 16V, OHV, MPFI, VX, 300KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 300KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, VY, 300KW, ENGCODE: LS1 GEN III MALOO 8 RIB POWER PULLEY KIT (PBO81480SC10) MAR 2001 – SEP 2002, 5.7L, V8, 16V, OHV, MPFI, VU, 225KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 260KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 285KW, ENGCODE: LS1 GEN III SENATOR 8 RIB POWER PULLEY KIT (PBO81480SC10) JUL 1999 – OCT 2000, 5.7L, V8, 16V, OHV, MPFI, VT, 250KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2000 – SEP 2002, 5.7L, V8, 16V, OHV, MPFI, VX, 255KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) OCT 2002 – JUL 2003, 5.7L, V8, 16V, OHV, MPFI, VY, 260KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) AUG 2003 – SEP 2004, 5.7L, V8, 16V, OHV, MPFI, VYII, 285KW, ENGCODE: LS1 GEN III SV 8 RIB POWER PULLEY KIT (PBO81480SC10) JUL 1999 – APR 2000, 5.7L, V8, 16V, OHV, MPFI, VT SV99, 250KW, ENGCODE: LS1 GEN III 8 RIB POWER PULLEY KIT (PBO81480SC10) SEP 2001 – DEC 2001, 5.7L, V8, 16V, OHV, MPFI, VX SV300, 300KW, ENGCODE: LS1 GEN III. Powerbond Power Pulley Kit. Idler/Tensioner PulleyWidth: 30.5mm. Idler/Tensioner PulleyWidth: 45.7mm. Overrunning Alternator PulleyWidth: 47.3mm. Powerbond Race Performance 10% Overdrive. Description: Powerbond Power Pulley Kits Available With Standard Diameter Or 10% Overdrive SFI Race Balancer. Kits Include Steel 8 Rib Idler & Tensioner Pulleys. All Kits Include 8 Rib Power Steering Pulleys. All Kits Include An Unique 8 Rib Alternator Overrun Pulley. Available For All Popular LS Engine Applications. Pulleys Can Be Ordered Separately To Build Your Own Drive System. Please check all the digits very carefully when doing bank deposit in order to avoid any inconveniences and delay. Please include your username and item no as reference when making the deposit. If text massage is not allowed, please leave your 4-digit postcode as reference. (Extra charge will be applied). In some rare exceptions, if we are not able to contact you within this time period, please send us emails. We will not be held liable for any incident or any accident or consequential damages related to the use or misuse of this item under any circumstances. No suitability of use is expressed or implied in this sale. The item “Powerbond 10% OVERDRIVE Pulley Kit FOR Holden Commodore 5.7 LS1 HSV GTO GTS SV” is in sale since Sunday, May 8, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Engines, Components\Other”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.

Compatible Makes: Ford
Manufacturer Part Number: aaaa
Brand: Unbranded/Generic

VE Holden Commodore V6 & V8 & HSV Aeroflow Billet Short Shifter Race Shift New

March 12, 2020holdenaeroflow, billet, commodore, holden, race, shift, shifter, shortadmin

Aeroflow Billet Short Shifter Suitable for VE Holden Commodore & HSV 6 Speed Manual, V6 & V8 Models. Aeroflow has become synonymous with premium quality performance products. Aeroflow’s objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability. Aeroflow’s billet aluminium short shifters are designed to reduce the shift throw by around a staggering 40% which results in harder, faster and more positive gear changes which are more crisp and precise. The original shifter position and height are retained. Each shifter body is precision CNC machined from billet aluminium and utilises high-grade steel shafts for a perfect combination of strength and performance. Fully adjustable positive stops help against over-shifting and damaging synchros. Aeroflow Billet Short Shifter. Adjustable Positive stops to prevent synchro breakage. Will accept stock gear knobs, boot etc. Perfect for Street, Strip and Circuit use. Suitable for all 6 Speed Manual VE V6 & V8 Holden Commodore & HSV. The item “VE Holden Commodore V6 & V8 & HSV Aeroflow Billet Short Shifter Race Shift New” is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Transmission\Shifters”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: AF64-2041
Brand: Aeroflow Performance

Superpro Front & Rear Sway Bar Link Kit For Holden Commodore Ve Vf Hsv Calais

March 11, 2020superprocalais, commodore, front, holden, link, rear, superpro, swayadmin

Please make sure this fits. EMS Express Post for order over 2kg 5-10 days – Tracking information available to most countries. Registered Post for order under 2kg (7-21 days). The item “SUPERPRO FRONT & REAR SWAY BAR LINK KIT FOR HOLDEN COMMODORE VE VF HSV CALAIS” is in sale since Thursday, August 3, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Suspension, Steering\Sway Bars”. The seller is “npowershop” and is located in Brisbane, QLD. This item can be shipped worldwide.

Manufacturer Part Number: TRC10245 TRC1045
Kit or Single Part: Kit
Brand: SuperPro

Hsv Bonnet Vents/grilles Pair Holden Commodore Ve New Genuine Hsv Bonnet Vent

March 10, 2020bonnetbonnet, commodore, genuine, holden, pair, vent, ventsgrillesadmin

Oz Car Parts OPEN 6 DAYS. Welcome to Oz Car Parts online shop for all your parts needs. ## Fitting Service Available In Our Mechanical Workshop Fully Licensed ##. Brand New GENUINE HOLDEN COMMODORE VE HSV GTS CLUBSPORT STEEL BONNET SCOOP GRILLES/VENTS/INSERTS PAIR NEW X2. LEFT HAND AND RIGHT HAND. NO PAINT ON IT, PRIMED.. Oz Car Parts is a family owned business established in 1998 to provide their customers with Direct Wholesale pricing on new Genuine and Aftermarket and Second hand Holden Commodore and Ford Falcon parts. We also have our own licensed mechanical workshop where we can fit your parts and log book servicing! Thanks for lookingOz Car Parts. The item “HSV BONNET VENTS/GRILLES PAIR HOLDEN COMMODORE VE NEW GENUINE HSV BONNET VENT” is in sale since Wednesday, February 5, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Exterior\Bonnets”. The seller is “ozcarparts1998″ and is located in smithfield. This item can be shipped worldwide.

Manufacturer Part Number: 92245143+92245142 SN101
Brand: HOLDEN GENUINE
Type: Bonnet Vent
Warranty: 1 Year

March 2020
M	T	W	T	F	S	S
« Feb				Apr »
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31