Tag Archives: leads

NGK Spark Plug Leads for Holden HSV LS2 L76 L77 L98 LS3 6.0L 6.2L V8 VZ VE VF

October 24, 2023sparkholden, leads, plug, sparkadmin

Brand new, genuine NGK ignition wire set for all Holden and HSV LS2, LS3, LS7, L76, L77, L98, LSA, 6.0, 6.2, 7.0L V8 motors. Compatible with NGK RC-HLK816. Does not include aluminium heat-shields. If you require heat shields you can find leads with heat shields here. About NGK Wire Sets. NGK is the Ignition Specialist with more OE expertise globally than any other brand. With over 80 years of automotive experience, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NGK wire sets have a high density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength. They provide superior firing and fuel savings, outstanding durability, excellent noise suppression, and consistent performance. Constructed with stainless steel terminals and a silicone seal at the spark plug boot. Fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit. Each NGK ignition wire is fitted with a positive locking, corrosion resistant stainless steel terminal end for tight fit and maximum resistance to vibration and separation. This wire set is direct-imported from an authorised NGK supplier in the USA. Buyers are also protected by Australian consumer law.

Spark Plugs & Leads Cables for Holden HSV LS1 V8 Commodore Calais VT VU VY VX VZ

October 23, 2023sparkcables, calais, commodore, holden, leads, plugs, sparkadmin

Leads Colour: YELLOW, also available in BLUE. NGK Ruthenium HX spark plugs: Ultimate ignitability. OML Platinum racing wires: Lowest resistance of any wire – Made in the USA. Brand new, genuine NGK. Brand new, genuine B&B OML race performance ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. Comes with a packet of dielectric grease. Latest technology in spark plugs. Compatible with OEM applications. NGK Laser Iridium IZTR5B11. NGK Laser Platinum PZTR5A-15. NGK Laser Platinum PTR5D-10. NGK Iridium IX TR5IX. NGK V-Power TR5; and. DENSO IT16, IT16TT, VT16. If unsure of fit message with your rego & state, or exact make and model and we will confirm. About Ruthenium HX Spark Plugs. Please see listing photos for comparison of Ruthenium HX spark plugs vs existing technologies. NGK Spark Plugs is introducing the latest technology in high ignitability spark plugs to the automotive aftermarket: NGK Ruthenium HXT. Ruthenium HXT spark plugs. The ultimate high ignitability spark plugs from NGK. Modern engines demand spark plugs that provide top performance while enduring the most severe conditions. NGK Ruthenium technology provides maximum durability and performance in newer engines where greater ignition efficiency is demanded. Modern engine designs utilize advanced technologies to create more power with less fuel. This results in greater heat and pressure in the combustion chamber, which shortens the life the spark plug. In response, NGK created Ruthenium HXT, a high ignitability spark plug with outstanding service life. Patented high ignitability DFE and PSPE tip designs provide the most efficient and complete fuel burn of any aftermarket plug, resulting in quicker throttle response, smoother idle and better cold starts. NGK’s Ruthenium alloy technology provides superior oxidation resistance, delivering unparalleled durability and outstanding service life. Patented OEM designs meet the demands of modern high heat engines. Ruthenium HXT contains all the features that enthusiasts expect from NGK spark plugs, including a high grade alumina silicate ceramic, trivalent plated, cold rolled threads, and the highest quality manufacturing and testing. About B&B OML: The Platinum Racing Wire Sets. B&B Platinum Racing Wires deliver ultimate electric performance through the best conductor ever made. They are engineered with a double pure silicone insulation braided for added pull strength and a Ferro spiral conductor with a low resistance impregnated core, which creates an outstanding RFI choke suppression. Wires are wound tighter for the lowest resistance available in the market (25 ohms per foot resistance). Best choice for both race and street applications. Extra thick 10mm diameter; and. Outer silicone jacket available in bright colors: blue, red and yellow. These products are direct-imported from an authorised NGK and B&B supplier in the USA. Domestic buyers are also protected by Australian consumer law.

Spark Plugs & Leads Cables for Holden HSV LS1 V8 Commodore Calais VT VU VY VX VZ

October 21, 2023sparkcables, calais, commodore, holden, leads, plugs, sparkadmin

Colour: RED, also available in BLUE. NGK Ruthenium HX spark plugs: Ultimate ignitability. OML Platinum racing wires: Lowest resistance of any wire – Made in the USA. Brand new, genuine NGK. Brand new, genuine B&B OML race performance ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. Comes with a packet of dielectric grease. Latest technology in spark plugs. Compatible with OEM applications. NGK Laser Iridium IZTR5B11. NGK Laser Platinum PZTR5A-15. NGK Laser Platinum PTR5D-10. NGK Iridium IX TR5IX. NGK V-Power TR5; and. DENSO IT16, IT16TT, VT16. If unsure of fit message with your rego & state, or exact make and model and we will confirm. About Ruthenium HX Spark Plugs. Please see listing photos for comparison of Ruthenium HX spark plugs vs existing technologies. NGK Spark Plugs is introducing the latest technology in high ignitability spark plugs to the automotive aftermarket: NGK Ruthenium HXT. Ruthenium HXT spark plugs. The ultimate high ignitability spark plugs from NGK. Modern engines demand spark plugs that provide top performance while enduring the most severe conditions. NGK Ruthenium technology provides maximum durability and performance in newer engines where greater ignition efficiency is demanded. Modern engine designs utilize advanced technologies to create more power with less fuel. This results in greater heat and pressure in the combustion chamber, which shortens the life the spark plug. In response, NGK created Ruthenium HXT, a high ignitability spark plug with outstanding service life. Patented high ignitability DFE and PSPE tip designs provide the most efficient and complete fuel burn of any aftermarket plug, resulting in quicker throttle response, smoother idle and better cold starts. NGK’s Ruthenium alloy technology provides superior oxidation resistance, delivering unparalleled durability and outstanding service life. Patented OEM designs meet the demands of modern high heat engines. Ruthenium HXT contains all the features that enthusiasts expect from NGK spark plugs, including a high grade alumina silicate ceramic, trivalent plated, cold rolled threads, and the highest quality manufacturing and testing. About B&B OML: The Platinum Racing Wire Sets. B&B Platinum Racing Wires deliver ultimate electric performance through the best conductor ever made. They are engineered with a double pure silicone insulation braided for added pull strength and a Ferro spiral conductor with a low resistance impregnated core, which creates an outstanding RFI choke suppression. Wires are wound tighter for the lowest resistance available in the market (25 ohms per foot resistance). Best choice for both race and street applications. Extra thick 10mm diameter; and. Outer silicone jacket available in bright colors: blue, red and yellow. These products are direct-imported from an authorised NGK and B&B supplier in the USA. Domestic buyers are also protected by Australian consumer law.

NGK Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

October 20, 2023sparkcalais, commodore, holden, leads, plug, sparkadmin

Brand new, genuine NGK ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. About NGK Wire Sets. NGK is the Ignition Specialist with more OE expertise globally than any other brand. With over 80 years of automotive experience, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NGK wire sets have a high density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength. They provide superior firing and fuel savings, outstanding durability, excellent noise suppression, and consistent performance. Constructed with stainless steel terminals and a silicone seal at the spark plug boot. Fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit. Each NGK ignition wire is fitted with a positive locking, corrosion resistant stainless steel terminal end for tight fit and maximum resistance to vibration and separation. This wire set is direct-imported from an authorised NGK supplier in the USA. Buyers are also protected by Australian consumer law.

Race Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

October 19, 2023racecalais, commodore, holden, leads, plug, race, sparkadmin

Colour: BLUE, also available in RED. Lowest resistance of any wire – Made in the USA. Brand new, genuine B&B OML race performance ignition wire set for all Holden and HSV LS1 5.7L V8 motors. Compatible with NGK RC-HLK808S. Does not include aluminium heat-shields. Comes with a packet of dielectric grease. About B&B OML: The Platinum Racing Wire Sets. B&B Platinum Racing Wires deliver ultimate electric performance through the best conductor ever made. They are engineered with a double pure silicone insulation braided for added pull strength and a Ferro spiral conductor with a low resistance impregnated core, which creates an outstanding RFI choke suppression. Wires are wound tighter for the lowest resistance available in the market (25 ohms per foot resistance). Best choice for both race and street applications. Extra thick 10mm diameter; and. Outer silicone jacket available in bright colors: blue, red and yellow. This wire set is direct-imported from an authorised B&B supplier in the USA. Buyers are also protected by Australian consumer law.

VE Holden Commodore & HSV L98 LS2 LS3 6lt 6.2lt V8 9mm ICE Ignition Leads Black

December 15, 2022holden62lt, black, commodore, holden, ignition, leadsadmin

ICE Ignition is an Australian company that is highly regarded both locally as well as in the highly competitive US market. This is in no small part due to the well-renowned dependability of their products, but also is owing in no small part to the staggering number of winning setups ICE Ignition systems and components have been used on. These include being fitted on winners of the Amsoil Engine Masters Challenge (EMC), numerous US and Australian drag racing vehicles as well as being used on 2 land speed record holding small block LS based Chevs, set at the Bonneville Salt Flats in Utah. The hotter and more powerful the spark – the easier your engine will start. The ultimate 9mm Pro 100 Series wires that are used in these ICE ignition leads are a spiral wound copper alloy core which have an extremely low resistance of just 100 ohms per metre which delivers maximum spark intensity and duration. This results in a better idle and an engine that will run cleaner. Along with the super low resistance of the leads, the ICE Ignition Pro 100 Series Ignition Leads also include the premium quality Snap Lock stainless steel distributor cap which protects the distributor’s internal parts and spark plug fittings. These Snap Lock fittings make installation very easy, and guarantee that the fitment will remain tight even with the huge fluctuations of temperature that is found in virtually every Holden engine bay. To finish off the kit the silicone wire insulation and boots are also able to handle extreme temperature, and are supplied in the kit in a stealthy and attractive black that will suit the style of any engine bay. ICE Ignition 9mm Pro 100 Series Ignition Leads Suitable for VE Holden Commodore & HSV L98 LS2 LS3 6lt 6.2lt V8. ICE Ignition Pro 100 9mm Ignition Leads. Plug wire markers included. Distributor Terminal Ends: To suit coil packs. Distributor Boot Colour: Black. Distributor Boot Material: Silicone. Spark Plug Boot Ends: 180°. Spark Plug Boot Colour: Black. Spark Plug Boot Material: Silicone. Coil Wire Included: Yes. Conductor Style: Spiral Wound Copper Alloy Core. To fit L98, LS2, LS3 engine type only. Will not fit any other engine type. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Ignition Systems & Components\Ignition Wires & Coil Boots”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped worldwide.

Brand: ICE Ignition
MPN: 9GM808-ad
Manufacturer Part Number: 9GM808-ad

VF Holden Commodore & HSV LS3 6.2L V8 8.5mm MSD Performance Ignition Leads Black

November 9, 2022holden85mm, black, commodore, holden, ignition, leads, performanceadmin

MSD 8.5mm Super Conductor Black Ignition Leads Suitable for VF Holden Commodore & HSV LS3 6.2lt V8. The MSD 8.5mm Super Conductor Wire is “the” performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. MSD’s 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot–but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. Of tightly wound copper for superior conductivity. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Diameter (mm): 8.50mm. Distributor Terminal Ends: Stock. Distributor Boot Color: Grey. Distributor Boot Material: Silicone. Spark Plug Boot Ends: Eight multi-angle. Spark Plug Boot Color: Grey. Spark Plug Boot Material: Silicone. Conductor Style: Spiral core. To fit LS3 engine type only. Will not fit any other engine type. This item is in the category “Vehicle Parts & Accessories\Car Performance Parts\Other”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped worldwide.

Brand: 0

MSD Hi Performance Ignition Leads Fits Holden Commodore/HSV LS1 VT-VY MSD5572

September 11, 2022performancecommodorehsv, fits, holden, ignition, leads, msd5572, performance, vt-vyadmin

1 X MSD Hi Performance Ignition Leads Fits Holden Commodore/HSV LS1 VT-VY – MSD5572. Additional parts MAY be needed to complete install. MSD Street Fire spark plug wire sets deliver high performance at a value price. MSD also built Street Fire wires to last. Manufactured in the USA, Street Fire wires feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and a KEVLAR® core to provide great strength and durability. FULL SET OF LEADS. Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse. We are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications. Including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics. 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers’ cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. This can be paid in Australia Dollar. BANK DEPOSIT WITHIN AUSTRALIA. We will arrange the product for you and inform you when they are ready. We are more than happy to assist you. Please ensure that you read and acknowledge the following terms and conditions prior to placing your order with TRIPLE NINE AUTOMOTIVE. All prices and descriptions are subject to change without notice. Online Team – 999Automotive. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Ignition Systems & Components\Distributors”. The seller is “999racing” and is located in this country: AU. This item can be shipped to Australia, all countries in Europe, all countries in continental Asia, United States, New Zealand, Canada.

Brand: MSD
MPN: 5572 (R21124375)
Manufacturer Part Number: 5572 (R21124375)
Factory Part Number: 5572
Return Postage Charges: Buyer will pay for any return postage
Item Picture: NOT the Actual Item (For Reference Only)

Spark Plugs & Leads Cables for Holden HSV LS1 V8 Commodore Calais VT VU VY VX VZ

August 3, 2022sparkcables, calais, commodore, holden, leads, plugs, sparkadmin

Brand new, genuine NGK. TR5AHX (94567) Ruthenium HX. Ignition wire set for all Holden and HSV LS1 5.7L V8 motors, c. Ompatible with NGK RC-HLK808S, d. Oes not include aluminium heat-shields. Latest technology in spark plugs. Compatible with OEM applications. NGK Laser Iridium IZTR5B11. NGK Laser Platinum PZTR5A-15. NGK Laser Platinum PTR5D-10. NGK Iridium IX TR5IX. NGK V-Power TR5; and. DENSO IT16, IT16TT, VT16. If unsure of fit message with your rego & state, or exact make and model and we will confirm. About Ruthenium HX Spark Plugs. Please see listing photos for comparison of Ruthenium HX spark plugs vs existing technologies. NGK Spark Plugs is introducing the latest technology in high ignitability spark plugs to the automotive aftermarket: NGK Ruthenium HXT. Ruthenium HXT spark plugs. The ultimate high ignitability spark plugs from NGK. Modern engines demand spark plugs that provide top performance while enduring the most severe conditions. NGK Ruthenium technology provides maximum durability and performance in newer engines where greater ignition efficiency is demanded. Modern engine designs utilize advanced technologies to create more power with less fuel. This results in greater heat and pressure in the combustion chamber, which shortens the life the spark plug. In response, NGK created Ruthenium HXT, a high ignitability spark plug with outstanding service life. Patented high ignitability DFE and PSPE tip designs provide the most efficient and complete fuel burn of any aftermarket plug, resulting in quicker throttle response, smoother idle and better cold starts. NGK’s Ruthenium alloy technology provides superior oxidation resistance, delivering unparalleled durability and outstanding service life. Patented OEM designs meet the demands of modern high heat engines. Ruthenium HXT contains all the features that enthusiasts expect from NGK spark plugs, including a high grade alumina silicate ceramic, trivalent plated, cold rolled threads, and the highest quality manufacturing and testing. About NGK Wire Sets. NGK is the Ignition Specialist with more OE expertise globally than any other brand. With over 80 years of automotive experience, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NGK wire sets have a high density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength. They provide superior firing and fuel savings, outstanding durability, excellent noise suppression, and consistent performance. Constructed with stainless steel terminals and a silicone seal at the spark plug boot. Fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance. High quality EPDM and Silicone coverings are used to resist high heat, oil and chemical damage for increased durability. Custom designed terminal boots are always used to provide exact fit. Each NGK ignition wire is fitted with a positive locking, corrosion resistant stainless steel terminal end for tight fit and maximum resistance to vibration and separation. These products are direct-imported from an authorised NGK supplier in the USA. Domestic buyers are also protected by Australian consumer law. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Ignition Systems & Components\Spark Plugs”. The seller is “peakperformanceparts” and is located in this country: AU. This item can be shipped worldwide.

Brand: NGK
Manufacturer Warranty: Lifetime
Manufacturer Part Number: TR5AHX, 94567
Universal Fitment: No
Performance Part: Yes
UPC: 00087295945674

NGK Spark Plug Leads for Holden HSV LS1 5.7L V8 Commodore Calais VT VU VX VY VZ

July 28, 2022sparkcalais, commodore, holden, leads, plug, sparkadmin

Brand: NGK
Type: Ignition Wire Set
Interchange Part Number: RC-HLK808S
Manufacturer Warranty: Lifetime
Connector Type: Female
Manufacturer Part Number: RC-GMX113, 51440
Insulation Outside Diameter: 8 mm
Material: High Temperature Silicone
Item Length: 230 mm
Universal Fitment: No
Reference OE/OEM Number: RC-HLK808S
Performance Part: Yes

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30