Orssom Performance Genairation4 OTR (Over The Radiator) Cold Air Intake Kit. Full Bundle with OTR Kit & Airbox Infill Panel. Suitable for VE V8 LS2, LS3, L98, L76 Holden Commodore & HSV – Retain Maf. Suitable for VE models built 2006 – up to Aug 2011. For Sept 2011 & later please see our other listings. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VE Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! This bundle also includes an Inner Guard Infill Panel, giving your engine bay that finishing touch! Upon removing your Factory Intake System, you are left with an un-sightly gap exposing the inner plastic wheel arch. Easily fits in minutes! What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. 1 x MAFLESS Adapter (Can be used to adapt to MAFLESS at a later date). The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. MAF fitment, (Must be fitted with the factory Air Flow Meter). Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VE Commodore – Up to Aug 2011. For vehicles built September 2011 and onwards please see our other listings. Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. This kit does not include the airflow meter, you must use your original factory unit. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! The item “VE V8 Holden Commodore & HSV 06-11 Orssom OTR Kit Maf Bundle with Infil Panel” is in sale since Monday, May 24, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “ihmawrtl” and is located in Largs Bay, SA. This item can be shipped worldwide.
- Brand: Holden
- Type: Cool Air Intake
- Custom Bundle: Yes
- Manufacturer Part Number: Does Not Apply