Tag Archives: 11-13

VE Holden Commodore HSV Harrop MAFLESS OTR Kit Bundle + Infill Side Fascia 11-13

February 19, 2022holden11-13, bundle, commodore, fascia, harrop, holden, infill, mafless, sideadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit Complete Bundle Including OTR Kit, Infill Panel & Side Fascia Panels Suitable for VE LS2, LS3, L98, L76 Holden Commodore & HSV – MAFLESS Suitable for September 2011 (MY12) – 2013 Models. Why choose a Harrop OTR? The reasons are many so the decision should be obvious. Other intakes on the market utilise cheap filter elements that often look legitimate but are in fact produced using inferior materials that regularly fail quality control standards here in Australia. Unlike the filter element used throughout the Harrop OTR range, which is manufactured by the biggest name in filters, K&N, explicitly to Harrop specifications and is co-branded with the Harrop moniker, a name synonymous with performance and quality for more than 65 years. The Harrop OTR pioneered the unique two-piece construction of the main intake body. This was designed by Harrop’s in-house engineering department to address issues found with offerings from the competition – the biggest being filter sealing issues which have the potential for major issues for your engine. It has since become the go-to design for Holden OTR intakes from virtually all competitors – however, the original Harrop design proves it is still far superior for strength, reliability and most importantly, power. Harrop also opted for a more premium option with external metal two-piece construction clamps, unlike competitor’s plastic tabs that are a part of the OTR housing that suffer from fatigue when they are bent open and closed to access the filter. This makes removing the filter far quicker and completely removes any stress put on the plastic OTR housing. When the filter is easier to access, you’ll also be far more inclined to service it regularly and enjoy the added performance from a clean element. Harrop OTR Cold Air Intake Kit. 100% Australian owned and designed. GENUINE washable & reusable K&N/Harrop air filter with a huge surface area, no inferior copies here. 100% housing sealing around the filter element – NOTHING gets around the air filter with this design. Easily removable filter for simple at home servicing and maintenance. OEM grade plastics, clips, fasteners and accessories. OEM grade fit and finish. Constructed from a durable high temperature ABS polymer meaning this OTR will still look great in years to come. Unlike other competitors, there are no fiddly and fragile plastic clips that will break over time. Interchangeable housing for VE from 2006 – VF 2017. You can take your OTR with you to fit on a different model (using the appropriate fitting kit). Retains your standard MAF (Mass Airflow Meter). Available in MAF or MAFLESS configurations – this listing is for MAFLESS, please see our store for MAF version. Complete OTR Bundle includes Harrop Side Fascia Panels (99-AKIT12114) and Infill Panel (99-PAN11206). Supplied complete with fitting kit and instructions. Can be fitted at home using simple hand tools. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, models built September 2011 – 2013 (for 2006 – August 2011 models, please see our store for other listings). Vehicles fitted with the VE HSV E2-E3 fluted bonnet (HSV E2-E3 & Pontiac G8 front) will require bonnet modifications which may include trimming the bonnet lining and bonnet braces to provide clearance. MAFLESS tune is required. This item is in the category “Vehicle Parts & Accessories\Car Performance Parts\Other”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped worldwide.

Brand: Harrop Engineering
Manufacturer Part Number: 99-AKIT12317-MAFLESS-BUNDLE
Warranty: 12 Month

VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAFLESS OTR Cold Air Kit 11-13

November 11, 2021holden11-13, cold, commodore, harrop, holden, maflessadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, MAFLESS. Suitable for VE models built September 2011 2013. Why choose a Harrop OTR? The reasons are many so the decision should be obvious. Other intakes on the market utilise cheap filter elements that often look legitimate but are in fact produced using inferior materials that regularly fail quality control standards here in Australia. Unlike the filter element used throughout the Harrop OTR range, which is manufactured by the biggest name in filters, K&N, explicitly to Harrop specifications and is co-branded with the Harrop moniker, a name synonymous with performance and quality for more than 65 years. The Harrop OTR pioneered the unique two-piece construction of the main intake body. This was designed by Harrops in-house engineering department to address issues found with offerings from the competition – the biggest being filter sealing issues which have the potential for major issues for your engine. It has since become the go-to design for Holden OTR intakes from virtually all competitors however, the original Harrop design proves it is still far superior for strength, reliability and most importantly, power. Harrop also opted for a more premium option with external metal two-piece construction clamps, unlike competitors plastic tabs that are a part of the OTR housing that suffer from fatigue when they are bent open and closed to access the filter. This makes removing the filter far quicker and completely removes any stress put on the plastic OTR housing. When the filter is easier to access, youll also be far more inclined to service it regularly and enjoy the added performance from a clean element. Harrop OTR Cold Air Intake Kit. 100% Australian owned and designed. GENUINE washable & reusable K&N/Harrop air filter with a huge surface area, no inferior copies here. 100% housing sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple at home servicing and maintenance. OEM grade plastics, clips, fasteners and accessories. OEM grade fit and finish. Constructed from a durable high temperature ABS polymer meaning this OTR will still look great in years to come. Unlike other competitors, there are no fiddly and fragile plastic clips that will break over time. Interchangeable housing for VE from 2006 – VF 2017. You can take your OTR with you to fit on a different model (using the appropriate fitting kit). Retains your standard MAF (Mass Airflow Meter). Available in MAF or MAFLESS configurations – this listing is for MAFLESS, please see our store for MAF version. Supplied complete with fitting kit and instructions. Can be fitted at home using simple hand tools. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, models built September 2011 – 2013 (for 2006 August 2011 models, please see our store for other listings). Vehicles fitted with the VE HSV E2-E3 fluted bonnet (HSV E2-E3 & Pontiac G8 front) will require bonnet modifications which may include trimming the bonnet lining and bonnet braces to provide clearance. MAFLESS tune is required. The item “VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAFLESS OTR Cold Air Kit 11-13″ is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car Performance Parts\Other”. The seller is “tuffcarparts” and is located in Moorabbin VIC. This item can be shipped worldwide.

Brand: Harrop Engineering
Manufacturer Part Number: 99-AKIT12317
Warranty: 12 Month
MPN: Does Not Apply

VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAF OTR Cold Air Intake 11-13

October 10, 2021holden11-13, cold, commodore, harrop, holden, intakeadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, retains MAF. Suitable for VE models built September 2011 – 2013. Why choose a Harrop OTR? The reasons are many so the decision should be obvious. Other intakes on the market utilise cheap filter elements that often look legitimate but are in fact produced using inferior materials that regularly fail quality control standards here in Australia. Unlike the filter element used throughout the Harrop OTR range, which is manufactured by the biggest name in filters, K&N, explicitly to Harrop specifications and is co-branded with the Harrop moniker, a name synonymous with performance and quality for more than 65 years. The Harrop OTR pioneered the unique two-piece construction of the main intake body. This was designed by Harrops in-house engineering department to address issues found with offerings from the competition – the biggest being filter sealing issues which have the potential for major issues for your engine. It has since become the go-to design for Holden OTR intakes from virtually all competitors however, the original Harrop design proves it is still far superior for strength, reliability and most importantly, power. Harrop also opted for a more premium option with external metal two-piece construction clamps, unlike competitors plastic tabs that are a part of the OTR housing that suffer from fatigue when they are bent open and closed to access the filter. This makes removing the filter far quicker and completely removes any stress put on the plastic OTR housing. When the filter is easier to access, youll also be far more inclined to service it regularly and enjoy the added performance from a clean element. Harrop OTR Cold Air Intake Kit. 100% Australian owned and designed. GENUINE washable & reusable K&N/Harrop air filter with a huge surface area, no inferior copies here. 100% housing sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple at home servicing and maintenance. OEM grade plastics, clips, fasteners and accessories. OEM grade fit and finish. Constructed from a durable high temperature ABS polymer meaning this OTR will still look great in years to come. Unlike other competitors, there are no fiddly and fragile plastic clips that will break over time. Interchangeable housing for VE from 2006 – VF 2017. You can take your OTR with you to fit on a different model (using the appropriate fitting kit). Retains your standard MAF (Mass Airflow Meter). Available in MAF or MAFLESS configurations – this listing is for MAF, please see our store for MAFLESS version. Supplied complete with fitting kit and instructions. Can be fitted at home using simple hand tools. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, models built September 2011 2013 (for 2006 through August 2011 models, please see our store for other listings). Vehicles fitted with the VE HSV E2-E3 fluted bonnet (HSV E2-E3 & Pontiac G8 front) will require bonnet modifications which may include trimming the bonnet lining and bonnet braces to provide clearance. The item “VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAF OTR Cold Air Intake 11-13″ is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: 99-AKIT12929
Brand: Harrop Engineering
Type: Cool Air Intake

VE Holden Commodore HSV Harrop MAF OTR Bundle + Infill Side Fascia Panels 11-13

October 1, 2021holden11-13, bundle, commodore, fascia, harrop, holden, infill, panels, sideadmin

Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Complete Bundle Including OTR Kit, Infill Panel & Side Fascia Panels. Suitable for VE LS2, LS3, L98, L76 Holden Commodore & HSV Retain MAF. Suitable for September 2011 (MY12) 2013 Models. Harrop Engineering is a true Australian success story. With their proven philosophy of delivering solutions based on excellence in design and manufacturing, the company has a rich history dating back more than 60 years. Driven by quality and performance, the Harrop team is committed to improving the safety, reliability and durability of their engineering products. Harrops quality-assurance system is accredited by world standards. This, combined with the company’s advanced product quality planning system, allow Harrop to deliver an outstanding level of service to their broad customer base ranging from global OE vehicle manufacturers to serious performance enthusiasts. With their specialised performance range of OTRs, superchargers, camshafts and manifolds, you can rest assured this pedigree guarantees you the very best possible quality intake on the market, all at a very sharp price. There are many OTR options available to V8 Commodore owners these days, so what makes the Harrop offering stand out from the pack? The Harrop Over the Radiator (OTR) cold air induction (CAI) system pioneered a unique two-piece construction of the main intake body. This was designed by Harrops huge in-house engineering department to address issues with other variants currently available – the biggest being filter sealing issues which have the potential for major issues for your engine. The two-piece construction clamps the K&N filter element between the two intake halves creating a 100% airtight seal. This results in an intake system that ensures complete air filtration while providing greater airflow and engine performance. The Harrop OTR range stands out against some well known competing brands with some unique features. Harrop Engineering Over The Radiator Cold Air Intake (MAF). 100% Australian owned and designed. Engineered by one of the greatest and longest standing names in the business. GENUINE purpose built K&N-Harrop air filter with a huge surface area, no inferior copies here. Two piece design that enables 100% sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple servicing and maintenance. OEM grade plastic finishes, clips, fasteners and accessories. OE style, constructed from a durable high temperature ABS polymer. No fiddly and fragile clips that will break in time with routine servicing this product is designed to be serviced, and to last. Interchangeable housing for 2006 -2016 Commodores models meaning you can take your OTR with you to fit on a later model. Complete OTR Bundle includes Harrop Side Fascia Panels (99-AKIT12114) and Infill Panel (99-PAN11206). With a history steeped in racing history, the Harrop OTR has been fitted on some of the quickest Holdens in the country and it can drastically improve your VE Holdens performance too! Suit VE Commodores built Sept 2011 (MY12) – 2013. For vehicles built 2006 through to Sept 2011, please see our other listings. Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. Will not suit V6 models. Will not suit forced induction applications. For FDFI suitable intakes, please see our other listings. For optimal results Harrop recommends every vehicle fitted with an OTR should receive a Dyno tune. This will ensure maximum performance gains and driveability characteristics are achieved. Models requiring bonnet modification include VE HSV with fluted bonnet (HSV E2-E3, VE G8 Pontiac Front) Please contact our team for installation guide. Additional brackets may be required for non-standard radiator supports missing mounting tabs. Please contact our team if these are required for your application. The item “VE Holden Commodore HSV Harrop MAF OTR Bundle + Infill Side Fascia Panels 11-13″ is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Non-Domestic Product: No
Manufacturer Part Number: 99-AKIT12929-MAF-BUNDLE
Modified Item: No
Custom Bundle: No
Brand: Harrop Engineering

Ve V8 Orssom Otr Mafless Cold Air Intake Kit Holden Commodore & Hsv 11-13

July 31, 2020orssom11-13, cold, commodore, holden, intake, mafless, orssomadmin

ORSSOM PERFORMANCE GENAIRATION4 OTR (OVER THE RADIATOR) COLD AIR INTAKE KIT. SUITABLE FOR VE V8 LS3, L98, L76 HOLDEN COMMODORE & HSV – MAFLESS. SUIT VE MODELS BUILT SEPT 2011 – UP TO 2013. FOR AUG 2011 & EARLIER PLEASE SEE OUR OTHER LISTINGS. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VE Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. Intake Air Temp (IAT) Sensor. IAT Sensor wiring extension harness. The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VE Commodore Sept 2011 – Up to 2013. For vehicles built Aug 2011 and earlier please see our other listings. MAFLESS tune is required. This kit is supplied complete with the Intake Air Temp (IAT) Sensor & wiring extension harness. You will need to drill a hole into the OTR for fitting of this. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid. Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake! Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! A huge range of different installations, induction sound vids and dyno results can be found on the Orssom youtube channel, but here are just a few Orssom samples below! The item “VE V8 ORSSOM OTR MAFLESS COLD AIR INTAKE KIT HOLDEN COMMODORE & HSV 11-13″ is in sale since Thursday, November 22, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Orssom Performance
Manufacturer Part Number: Does Not Apply

VE Holden Commodore & HSV V8 Orssom OTR Kit MAF Bundle with Infill Panel 11-13

June 15, 2020holden11-13, bundle, commodore, holden, infill, orssom, paneladmin

Orssom Performance Genairation4 OTR (Over The Radiator) Cold Air Intake Kit. Full bundle with OTR Kit & Airbox Infill Panel. Suitable for VE V8 LS3, L98, L76 Holden Commodore & HSV – Retain MAF. Suitable for VE Models built Sept 2011 – up to 2013. For Aug 2011 & earlier please see our other listings. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VE Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! This bundle also includes an Inner Guard Infill Panel, giving your engine bay that finishing touch! Upon removing your Factory Intake System, you are left with an un-sightly gap exposing the inner plastic wheel arch. Easily fits in minutes! What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. 1 x MAFLESS Adapter (Can be used to adapt to MAFLESS at a later date). The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. MAF fitment, (Must be fitted with the factory Air Flow Meter). Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VE Commodore Sept 2011 – Up to 2013. For vehicles built Aug 2011 and earlier please see our other listings. Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. This kit does not include the airflow meter, you must use your original factory unit. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid. Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake! Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! The item “VE Holden Commodore & HSV V8 Orssom OTR Kit MAF Bundle with Infill Panel 11-13″ is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Orssom Performance
Manufacturer Part Number: Does Not Apply
Type: Cool Air Intake

VE Holden Commodore HSV VCM Mafless OTR Cold Air Kit LS2 L76 L98 LS3 V8 11-13

April 3, 2020holden11-13, cold, commodore, holden, maflessadmin

VCM PERFORMANCE PLASTIC OVER THE RADIATOR (OTR) COLD AIR INTAKE KIT. SUITABLE FOR VE LS2, LS3, L98, L76 HOLDEN COMMODORE & HSV – MAFLESS. SUIT VE MODELS BUILT SEPT 2011 TO 2013. ALL NEW 2 PIECE SERIES 2 DESIGN VCM OTR! Proudly Australian made from only the finest components, we here at Tuff Car Parts recommend the VCM OTR as the best intake on the market. The VCM Performance VE OTR is available in MAF, MAFless and Supercharged variants to suit the 6lt and 6.2lt V8 VE Commodores. The OTR kit can be fitted using simple hand tools in around 45mins. The package includes the Plastic OTR, a K&N panel filter, a VCM rubber coupling, hose clamps, brackets, and we even provide installation instructions! VCM Performance have seen gains in standard vehicles of up to 30rwkw over standard with this intake installed! For a more complete solution also look to fit the VE infill panel, Fascia Panel and Hood Insert Panel which are listed seperately in our store, or as a complete bundle! Suit VE Commodore – Built from September 2011 – 2013. For vehicles built before September 2011 please see our other listings. OEM style plastic construction – lightweight & strong with lower heat retention than aluminium designs. Large filter area using a genuine K&N air filter. Powder coated OEM specification radiator mounting brackets to ensure a secure installation. Stainless steel hose clamps. OEM style drain valve. OEM specification radiator bracket washers. Available in retain MAF or MAFLESS configurations – this listing is for MAFLESS, please see our store for MAF version. Removes your factory airflow meter (MAF) for least restriction and maximum performance. Genuine VCM OTR intake. Genuine K&N Air Filter. Genuine VCM Rubber boot / coupling. Very high quality intake in a proven well known brand – don’t risk it with a no-name custom fabricated or imported item. Tuff Car Parts are an authorised VCM dealer and you can be assured of being supplied with a 100% GENUINE VCM intake! MAFLESS tune is required. The VCM Design brief: VE Commodore OTR Behind the scenes, VCM Performance has been working on the development of a new generation VE OTR Cold Air Intake system, creating a design on the premise of taking the aftermarket bolt-on high performance parts industry into the OEM realm. From the outset VCM adopted an all-encompassing approach, kicking off the process by securing the services of an industry leading Design Engineer with induction process credentials that are respected for being world class. His brief was to assist in the design and development of a product and ancillaries that would exceed the demands of the neediest customer; he would ensure OEM fitment and finish. Design Parameters Utilize existing real estate without the need to modify (cut or tweak) any OEM panel or part Establish the boundaries for flow analysis (vehicle pressure v depression areas) Maintain a modular approach while taking into account the need to accommodate all possible iterations including: MAF, MAF-less, manual transmission, automatic transmission, air conditioning, Harrop supercharger, SS, Calais, Statesman, Maloo, Clubsport, GTS etc Equip the solution with the largest readily available K&N air filter panel basing this criteria on established research proving that the larger the area, the less restriction & servicing required Provide a failsafe method of dispersing the ingress of water in adverse weather Fully enclose filter to meet ADR compliance. Utilizing the largest possible filter in an enclosed area offers, over and above reduced restriction, significantly reduced intake noise OEM finish & fit Minimal restriction to existing cooling system components (radiator, automatic transmission cooler, intercooler) Material use: Homogonous polymers such as OEM high temperature polypropylene. Materials such as fibreglass will not be considered Easy fitment with normal home garage tools Easy filter access for cleaning Flexible couplings to allow for engine movement therefore limiting the potential for material and/or associated OEM component fatigue Ensure OEM quality connectivity of all electrical and mechanical fittings Verify OTR design through CFD (Computational Fluid Dynamics) Create prototypes using laser sintering followed by extensive real world testing with all configurations being tested on multiple vehicles Ensure materials can be coloured / body-matched Create complementary ancillary components (infill panel, hood panel insert for some supercharged applications) Be AUSTRALIAN MADE Component list: OTR CAI body K&N Filter Powder coated OEM specification radiator mounting brackets OEM flexible couplings Stainless steel hose clamps OEM style drain valve OEM specification radiator bracket washers OEM breather connector Fitting instructions. The item “VE Holden Commodore HSV VCM Mafless OTR Cold Air Kit LS2 L76 L98 LS3 V8 11-13″ is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: Does Not Apply
Brand: VCM Performance

VE Holden Commodore HSV VCM Mafless OTR Bundle Infill & Side Fascia Panels 11-13

April 1, 2020holden11-13, bundle, commodore, fascia, holden, infill, mafless, panels, sideadmin

VCM PERFORMANCE PLASTIC OVER THE RADIATOR (OTR) COLD AIR INTAKE KIT. FULL BUNDLE WITH OTR KIT, INFILL PANEL & FASCIA/SIDE PANELS. SUITABLE FOR VE LS2, LS3, L98, L76 HOLDEN COMMODORE & HSV – MAFLESS. SUIT VE MODELS BUILT SEPT 2011 TO 2013. The VCM Performance VE OTR MAFLESS Product Bundle. ALL NEW 2 PIECE SERIES 2 DESIGN VCM OTR! VCM Performance VE MAFLESS OTR. The VCM VE OTR will suit the V8 VE Commodores – in Automatic and Manual form. It can be installed in around 45mins using simple hand tools, and comes with fitting instructions. VCM Performance VE Infill Panel. The VCM infill panel is utilised to give the engine bay a clean look when removing the factory airbox assembly. VCM Facia Panel Kit. The facia panel kit – as pictured, cover the sides of the VE OTR and complete the sleek, clean OEM look with the VE OTR. Proudly Australian made from only the finest components, we here at Tuff Car Parts recommend the VCM OTR as the best intake on the market. The VCM Performance VE OTR is available in MAF, MAFless and Supercharged variants to suit the 6lt and 6.2lt V8 VE Commodores. The OTR kit can be fitted using simple hand tools in around 45mins. The package includes the Plastic OTR, a K&N panel filter, a VCM rubber coupling, hose clamps, brackets, and we even provide installation instructions! VCM Performance have seen gains in standard vehicles of up to 30rwkw over standard with this intake installed! Suit VE Commodore – Built from September 2011 – 2013. For vehicles built before September 2011 please see our other listings. OEM style plastic construction – lightweight & strong with lower heat retention than aluminium designs. Large filter area using a genuine K&N air filter. Powder coated OEM specification radiator mounting brackets to ensure a secure installation. Stainless steel hose clamps. OEM style drain valve. OEM specification radiator bracket washers. Available in retain MAF or MAFLESS configurations – this listing is for MAFLESS, please see our store for MAF version. Removes your factory airflow meter (MAF) for least restriction and maximum performance. Genuine VCM OTR intake. Genuine K&N Air Filter. Genuine VCM Rubber boot / coupling. Very high quality intake in a proven well known brand – don’t risk it with a no-name custom fabricated or imported item. Tuff Car Parts are an authorised VCM dealer and you can be assured of being supplied with a 100% GENUINE VCM intake! MAFLESS tune is required. Want a hood/bonnet insert panel as well? Then please see our other listings with hood panel! The VCM-P VE Infill Panel is utilised to fill the ugly gap left after removal of the factory airbox in favor of an aftermarket OTR style intake. VCM Performance VE OTR Side Facia Panels In response to customer demand, VCM Performance has created left and right hand Facia Panels that perfectly integrate with our VE OTR CAI. Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new VCM OTR housings via pins, and with factory style push clips securing either end for a completely solid solution. The VCM Design brief: VE Commodore OTR Behind the scenes, VCM Performance has been working on the development of a new generation VE OTR Cold Air Intake system, creating a design on the premise of taking the aftermarket bolt-on high performance parts industry into the OEM realm. From the outset VCM adopted an all-encompassing approach, kicking off the process by securing the services of an industry leading Design Engineer with induction process credentials that are respected for being world class. His brief was to assist in the design and development of a product and ancillaries that would exceed the demands of the neediest customer; he would ensure OEM fitment and finish. Design Parameters Utilize existing real estate without the need to modify (cut or tweak) any OEM panel or part Establish the boundaries for flow analysis (vehicle pressure v depression areas) Maintain a modular approach while taking into account the need to accommodate all possible iterations including: MAF, MAF-less, manual transmission, automatic transmission, air conditioning, Harrop supercharger, SS, Calais, Statesman, Maloo, Clubsport, GTS etc Equip the solution with the largest readily available K&N air filter panel basing this criteria on established research proving that the larger the area, the less restriction & servicing required Provide a failsafe method of dispersing the ingress of water in adverse weather Fully enclose filter to meet ADR compliance. Utilizing the largest possible filter in an enclosed area offers, over and above reduced restriction, significantly reduced intake noise OEM finish & fit Minimal restriction to existing cooling system components (radiator, automatic transmission cooler, intercooler) Material use: Homogonous polymers such as OEM high temperature polypropylene. Materials such as fibreglass will not be considered Easy fitment with normal home garage tools Easy filter access for cleaning Flexible couplings to allow for engine movement therefore limiting the potential for material and/or associated OEM component fatigue Ensure OEM quality connectivity of all electrical and mechanical fittings Verify OTR design through CFD (Computational Fluid Dynamics) Create prototypes using laser sintering followed by extensive real world testing with all configurations being tested on multiple vehicles Ensure materials can be coloured / body-matched Create complementary ancillary components (infill panel, hood panel insert for some supercharged applications) Be AUSTRALIAN MADE Component list: OTR CAI body K&N Filter Powder coated OEM specification radiator mounting brackets OEM flexible couplings Stainless steel hose clamps OEM style drain valve OEM specification radiator bracket washers OEM breather connector Fitting instructions. The item “VE Holden Commodore HSV VCM Mafless OTR Bundle Infill & Side Fascia Panels 11-13″ is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: Does Not Apply
Brand: VCM Performance

VE Holden Commodore & HSV V8 Orssom OTR MAF Cold Air Intake Kit 11-13 New

March 25, 2020holden11-13, cold, commodore, holden, intake, orssomadmin

Orssom Performance Genairation4 OTR (Over The Radiator) Cold Air Intake Kit. Suitable for VE Holden Commodore & HSV V8 LS3, L98, L76 – Retain MAF. Suitable for VE models built sept 2011 – up to 2013. For aug 2011 & earlier please see our other listings. POWER, PERFORMANCE & ECONOMY is what is achieved by installing one of these Orssom Performance Cold Air Intakes! No wonder ORSSOM is the VE Holden owners most popular choice when it comes to Over The Radiator Cold Air Intakes. Due to overwhelming sales and popularity of the Orssom Performance Cold Air Intake (Aust reg design No: 315677) to keep up with demand Orssom have recently started manufacturing these intakes out of a premium quality OEM grade injected plastic. Orssom Performance products are NOT vacuum formed or rotational moulded like most cheaper intakes in todays market, which use recycled plastics. Orssom products are made from factory OEM grade plastic material similar to that found in other plastic components under you bonnet. Other inferior grade, competing products over time, will not stand up to the under bonnet temperatures resulting in cracking & distorting, neck areas collapsing, air filters falling out of them until finally they find their way into the rubbish bin. Using a genuine K&N air filter with a huge surface area, the Orssom OTR offers huge flow with perfect filter retention. The filter has an outside width 478mm (18.813″), outside height of 144mm (5.688″) and an outside thickness of 30mm (1.188). Once installed to the vehicle, the filter is retained in a recessed base and is then securely seated by the top cover assembly which is then screwed down. Nothing but cool, clean air will ever get past this air filter! The Orssom OTR kit is specifically designed for the DIY enthusiast and can be fitted using simple hand tools in around 30mins! The package includes the high grade plastic OTR, a K&N panel filter, full fitting kit and we even provide installation instructions! If that’s not enough, a range of helpful videos can be found on the Orssom youtube channel shown below! What you get in this OTR Kit. Genuine K&N Air Filter re-washable (Part No 33-2640). 3 x OTR Mounting Brackets. 2 x 102mm Rubber Bellows. 3 x Speed Clips. 3 x Phillips Head Screws. 1 x 10mm Length Vacuum Breather Hose. 1 x MAFLESS Adapter (Can be used to adapt to MAFLESS at a later date). The benefits of the Orssom Performance intake over the competition are. Due to the wide, beautiful flowing design of the Orssom OTR, you do not need the extra expense of side dress up panels as with other brands. NO laying back of radiator to fit the intake. NO cutting or lengthening of any electrical wires. NO cutting of any body panels to fit intake. NO removing bumper bars to clean or replace air filters. MAF fitment, (Must be fitted with the factory Air Flow Meter). Strong design and internal bracing means this OTR will never crack, deform or let anything past the filter but clean, cool air. Dont let the sleek, Factory appearance of the intake fool you! Immediately upon installing the intake, you will notice the instant throttle response and smoothness in acceleration. You will also notice, you dont have to accelerate as far to get you to the speed you were traveling prior to fitting the intake. Under hard acceleration the intake gives a nice deep, throaty induction sound, just enough to let the guy at the set of lights next to you, know that you have some serious business under the bonnet! Extensive research and development has gone into designing the Orssom Performance Over The Radiator Cold Air Intakes. Be it on road testing, track or on the dyno the following are major proven factors that will be achieved when fitting an Orssom Performance OTRCAI to your vehicle. Cooler air intake temperatures. Increased air flow to your engine. Increase in power and torque. Improvement to your fuel economy. OEM style for that stealth under bonnet appearance. Gains between 3 to 5 mph terminal speed. Up to 1/2 a second off your ET (elapsed time) on the 1/4 mile. Suit VE Commodore Sept 2011 – Up to 2013. For vehicles built Aug 2011 and earlier please see our other listings. Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. This kit does not include the airflow meter, you must use your original factory unit. The intake can be installed in around 30 minutes, with the aid of: 7mm & 10mm socket and ratchet, Phillips head and straight blade screw driver, sharp knife or razor blade to trim the hood seal and the fan shroud clips. Easy to follow fitting instructions come in the kit. For further information, please review the installation instructions shown in the images for this listing. Recently poor quality copies of these intakes have surfaced on the market. How to identify a copy. Genuine Orssom Performance Intakes have several distinguishing marks and features on them. You will view these marking shown in our product photo’s listed. Genuine Orssom Performance Intakes are Injected Plastic not Fibreglass. Genuine Orssom Performance Intakes have the Orssom Performance Logo embossed on the Top lids. Genuine Orssom Performance Intake have 2 support braces which are located at the front opening on the Top lid. Tuff Car Parts are a fully authorised ORSSOM dealer and you can be assured of being supplied with a 100% GENUINE ORSSOM intake! Don’t take our word for it though! See just how Orssom these are for yourself at the Orssom youtube channel! The item “VE Holden Commodore & HSV V8 Orssom OTR MAF Cold Air Intake Kit 11-13 New” is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Moorabbin, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Orssom Performance
Manufacturer Part Number: Does Not Apply
Type: Cool Air Intake

VE Holden Commodore HSV 11-13 VCM MAF OTR Bundle with Infill Side Fascia Panels

March 16, 2020holden11-13, bundle, commodore, fascia, holden, infill, panels, sideadmin

VCM PERFORMANCE PLASTIC OVER THE RADIATOR (OTR) COLD AIR INTAKE KIT. FULL BUNDLE WITH OTR KIT, INFILL PANEL & FASCIA/SIDE PANELS. SUITABLE FOR VE LS2, LS3, L98, L76 HOLDEN COMMODORE & HSV – RETAIN MAF. SUIT VE MODELS BUILT SEPT 2011 TO 2013. The VCM Performance VE OTR MAF Product Bundle. ALL NEW 2 PIECE SERIES 2 DESIGN VCM OTR! VCM Performance VE MAF OTR. The VCM VE OTR will suit the V8 VE Commodores – in Automatic and Manual form. This specific package allows you to retain the MAF inline between the OTR intake and the throttle body. It can be installed in around 45mins using simple hand tools, and comes with fitting instructions. VCM Performance VE Infill Panel. The VCM infill panel is utilised to give the engine bay a clean look when removing the factory airbox assembly. VCM Facia Panel Kit. The facia panel kit – as pictured, cover the sides of the VE OTR and complete the sleek, clean OEM look with the VE OTR. Proudly Australian made from only the finest components, we here at Tuff Car Parts recommend the VCM OTR as the best intake on the market. The VCM Performance VE OTR is available in MAF, MAFless and Supercharged variants to suit the 6lt and 6.2lt V8 VE Commodores. The OTR kit can be fitted using simple hand tools in around 45mins. The package includes the Plastic OTR, a K&N panel filter, a VCM rubber coupling, hose clamps, brackets, and we even provide installation instructions! VCM Performance have seen gains in standard vehicles of up to 30rwkw over standard with this intake installed! Suit VE Commodore – Built from September 2011 – 2013. For vehicles built before September 2011 please see our other listings. OEM style plastic construction – lightweight & strong with lower heat retention than aluminium designs. Large filter area using a genuine K&N air filter. Powder coated OEM specification radiator mounting brackets to ensure a secure installation. Stainless steel hose clamps. OEM style drain valve. OEM specification radiator bracket washers. Available in retain MAF or MAFLESS configurations – this listing is for MAF, please see our store for MAFLESS version. Retains your factory airflow meter (MAF). Genuine VCM OTR intake. Genuine K&N Air Filter. Genuine VCM Rubber boot / coupling. Very high quality intake in a proven well known brand – don’t risk it with a no-name custom fabricated or imported item. Tuff Car Parts are an authorised VCM dealer and you can be assured of being supplied with a 100% GENUINE VCM intake! Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. Want a hood/bonnet insert panel as well? Then please see our other listings with hood panel! The VCM-P VE Infill Panel is utilised to fill the ugly gap left after removal of the factory airbox in favor of an aftermarket OTR style intake. VCM Performance VE OTR Side Facia Panels In response to customer demand, VCM Performance has created left and right hand Facia Panels that perfectly integrate with our VE OTR CAI. Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new VCM OTR housings via pins, and with factory style push clips securing either end for a completely solid solution. The VCM Design brief: VE Commodore OTR Behind the scenes, VCM Performance has been working on the development of a new generation VE OTR Cold Air Intake system, creating a design on the premise of taking the aftermarket bolt-on high performance parts industry into the OEM realm. From the outset VCM adopted an all-encompassing approach, kicking off the process by securing the services of an industry leading Design Engineer with induction process credentials that are respected for being world class. His brief was to assist in the design and development of a product and ancillaries that would exceed the demands of the neediest customer; he would ensure OEM fitment and finish. Design Parameters Utilize existing real estate without the need to modify (cut or tweak) any OEM panel or part Establish the boundaries for flow analysis (vehicle pressure v depression areas) Maintain a modular approach while taking into account the need to accommodate all possible iterations including: MAF, MAF-less, manual transmission, automatic transmission, air conditioning, Harrop supercharger, SS, Calais, Statesman, Maloo, Clubsport, GTS etc Equip the solution with the largest readily available K&N air filter panel basing this criteria on established research proving that the larger the area, the less restriction & servicing required Provide a failsafe method of dispersing the ingress of water in adverse weather Fully enclose filter to meet ADR compliance. Utilizing the largest possible filter in an enclosed area offers, over and above reduced restriction, significantly reduced intake noise OEM finish & fit Minimal restriction to existing cooling system components (radiator, automatic transmission cooler, intercooler) Material use: Homogonous polymers such as OEM high temperature polypropylene. Materials such as fibreglass will not be considered Easy fitment with normal home garage tools Easy filter access for cleaning Flexible couplings to allow for engine movement therefore limiting the potential for material and/or associated OEM component fatigue Ensure OEM quality connectivity of all electrical and mechanical fittings Verify OTR design through CFD (Computational Fluid Dynamics) Create prototypes using laser sintering followed by extensive real world testing with all configurations being tested on multiple vehicles Ensure materials can be coloured / body-matched Create complementary ancillary components (infill panel, hood panel insert for some supercharged applications) Be AUSTRALIAN MADE Component list: OTR CAI body K&N Filter Powder coated OEM specification radiator mounting brackets OEM flexible couplings Stainless steel hose clamps OEM style drain valve OEM specification radiator bracket washers OEM breather connector Fitting instructions. The item “VE Holden Commodore HSV 11-13 VCM MAF OTR Bundle with Infill Side Fascia Panels” is in sale since Sunday, October 13, 2019. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: Does Not Apply
Modified Item: No
Custom Bundle: No
Brand: VCM Performance
Non-Domestic Product: No

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30