Tag Archives: ns400

PROJECT-MU-BRAKE-PADS-NS400-for-HOLDEN-COMMODORE-VE-HSV-AP-Racing-4pot-F-01-ovo

PROJECT MU BRAKE PADS NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F

project, , , , , , ,
PROJECT MU BRAKE PADS NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F

PROJECT MU BRAKE PADS NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F
1 SET OF PROJECT MU BRAKE PADS NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot {F}. Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse. We are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications. Including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics. 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers’ cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. This can be paid in Australia Dollar. BANK DEPOSIT WITHIN AUSTRALIA. We will arrange the product for you and inform you when they are ready. We are more than happy to assist you. Please ensure that you read and acknowledge the following terms and conditions prior to placing your order with TRIPLE NINE AUTOMOTIVE. All prices and descriptions are subject to change without notice. Online Team – 999Automotive. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Pads”. The seller is “999racing” and is located in this country: AU. This item can be shipped to Australia, all countries in Europe, all countries in continental Asia, United States, New Zealand, Canada.
  • Brand: PROJECT MU
  • MPN: NS400 (R210500360)
  • Manufacturer Part Number: NS400 (R210500360)
  • Return Postage Charges: Buyer will pay for any return postage
  • Item Picture: NOT the Actual Item (For Reference Only)

PROJECT MU BRAKE PADS NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VE-HSV-E3-GTS-Yellow-Calipers-R-01-dw

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 GTS Yellow Calipers R

project, , , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 GTS Yellow Calipers R

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 GTS Yellow Calipers R
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 GTS Yellow Calipers R” is in sale since Thursday, January 7, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 GTS Yellow Calipers R
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VE-HSV-AP-Racing-4pot-R-01-hir

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot R

project, , , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot R

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot R
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot R” is in sale since Saturday, August 19, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot R
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VE-HSV-E3-Clubsport-Red-R-01-fgx

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red R

project, , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red R

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red R
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red R” is in sale since Saturday, August 19, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red R
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VF-HSV-Clubsport-Red-Calipers-R-01-tvuh

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers R

project, , , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers R

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers R
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers R” is in sale since Thursday, January 7, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers R
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VF-HSV-Clubsport-Red-Calipers-F-01-wp

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers F

project, , , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers F

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers F
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers F” is in sale since Thursday, January 7, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VF HSV Clubsport Red Calipers F
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VE-HSV-AP-Racing-4pot-F-01-pa

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F

project, , , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F” is in sale since Thursday, January 7, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV AP Racing 4pot F
PROJECT-MU-NS400-for-HOLDEN-COMMODORE-VE-HSV-E3-Clubsport-Red-F-01-hdxy

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red F

project, , , ,
PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red F

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red F
Project Mu NS400 street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS400 pads are a reliable simple way to upgrade your braking performance for minimal cost. NS400 street pads give outstanding initial stopping power that is of prime importance on the street. Made from Asbestos-free brake compounds, NS street pads have excellent low dust andsqueal properties. Use this pad if you like to get the most out of your street car. When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a’gas layer’ between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won’t slow down as normal. This phenomenon is known as’fade’. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution. Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This’problem’ is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car. Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process’burns out’ unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light’bedding in’ to match the pad to your rotor surface. Brake Pad Structural Stability. Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors. We must be notifying within 10 days of receipt if an item is damaged or not delivered. We may also ask to provide pictures to help expedite the claim process. Must be notifying within 10 days. Must notify within 10 days. We need to get the tracking/invoice # off the box so be sure not to throw away any packaging materials. We will send you return instructions and replace the correct part for you. If shows delivered we will try to retrieve package no guarantee. Defects and Fitments issues. Notify within 10 days. We recommend profession help if you encounter problems. We may ask to provide pictures to show issues then determine if we will accept the return. The item “PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red F” is in sale since Thursday, January 7, 2016. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Brake Pads”. The seller is “cjmotor” and is located in Sunnybank Hills, QLD. This item can be shipped worldwide.
  • Brand: PROJECT MU
  • Manufacturer Part Number: NS400

PROJECT MU NS400 for HOLDEN COMMODORE VE HSV E3 Clubsport Red F