Tag Archives: id1050

Injector-Dynamics-ID1050-Fit-Holden-Commodore-Monaro-W427-E-HSV-Fuel-cc-min-8-01-od

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8
Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8
Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8. This product data sheet is originally written in English. Injector Dynamics Direct Warehouse Distributor – All ID Products Available! NEW Injector Dynamics 1050cc Fuel Injectors. These injectors are IN STOCK, on our shelves. You will receive a Set of 8 BRAND NEW Injector Dynamics for fuel injectors similar to the photo. The ID1050 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community. This series of innovations and “firsts” have made it the most popular – and most copied – injector on the market today. With a maximum pressure capability of 7 bar and smooth response at low flow, this is a versatile injector that will be at home in many different applications. From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1050 set the standard and marked the beginning of a NEW ERA in fuel injector performance. The first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly. The first injector to be offered in dead time matched sets. The first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder. The first injector offered with the now standard “Top Hat Adapter” making it plug and play in nearly any application. The Injector Dynamics Data. Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so it’s no wonder that if you’re tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professional tuner, or an end user, you can spend countless hours getting it “mostly correct” or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability. Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers. These Injector Dynamics fuel injectors will fit many applications, including, but not limited to. Holden Commodore VZ LS2 Holden Commodore W427 LS7 These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Commodore E-HSV These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Monaro LS2 Slope and Offset vs. Pressure data and tuning data for EFI Live and HP Tuners are available upon request. All high performance injectors will require ECU tuning for proper performance. We have injectors to fit almost every performance application! We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627. The free listing tool. Whether you are a professi. VZ LS2 LS3 LS7 LS9 EV6 USCAR 1000cc/min. 1050.34.14.15.8. Verify Flow Rate is what you need. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Fuel Injectors”. The seller is “treperformance” and is located in this country: US. This item can be shipped worldwide.
  • Interchange Part Number: VZ LS2 LS3 LS7 LS9 EV6 USCAR 1000cc/min
  • Placement on vehicle: Front
  • Brand: Injector Dynamics
  • Manufacturer Part Number: 1050.34.14.15.8.Holden
  • Important Information: Verify Flow Rate is what you need
  • Part brand: Injector Dynamics
  • Manufacturer Warranty: Yes
  • Core Charge: None

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8
Injector-Dynamics-ID1050-XDS-for-Holden-Commodore-E-HSV-series-LS3-01-etz

Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3

Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3

Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3
In that case, we will contact you to find the best solution. Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3. ID1050-XDS, for Commodore E Series HSV / LS3 applications. Standard (no adaptor), Orange lower o-ring, set of 8. The ID1050-XDS is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300-XDS, and ID1700-XDS. Like the ID1300-XDS and ID1700-XDS, the ID1050-XDS is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050-XDS offers numerous improvements, and is sure to become the new reference. Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels. Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors. Improved internal flow path increases output by 5% without sacrificing low flow performance. Stronger magnetic circuit offers stable operation up to 10 bar. Replaceable inlet filter extends service life. Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi). Fuel Compatibility – Compatible With All Known Fuels. Electrical Connector – USCAR. Thank you for visiting our listing, if you have any question please don’t hesitate to ask us! Many items that do not state “In Stock” are in stock. However, some are not. We have no control over their policies. Quantity on Hand / Quantity Available: Quantity on hand is subject to change at any given time. Due to the rapid pace, we may not always have the physical stock. We expect to earn FIVE STAR ratings from you. We will do everything possible to remedy anything that has gone wrong and make you happy! Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. Thank you for looking at our item, and we do hope to do business with you. The item “Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3″ is in sale since Thursday, November 29, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “myjdmparts” and is located in Brea, California. This item can be shipped worldwide.
  • Country of Manufacturer: United States
  • Manufacturer Part Number: ID-1050.34.14.15.8.EHSV
  • Brand: Injector Dynamics

Injector Dynamics ID1050 XDS for Holden Commodore E HSV series LS3
Injector-Dynamics-ID1050-Fit-Holden-Commodore-Monaro-W427-E-HSV-Fuel-cc-min-8-01-adih

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8
Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8
Injector Dynamics Direct Warehouse Distributor – All ID Products Available! NEW Injector Dynamics 1050cc Fuel Injectors. These injectors are IN STOCK, on our shelves. You will receive a Set of 8 BRAND NEW Injector Dynamics for fuel injectors similar to the photo. The ID1050 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community. This series of innovations and “firsts” have made it the most popular – and most copied – injector on the market today. With a maximum pressure capability of 7 bar and smooth response at low flow, this is a versatile injector that will be at home in many different applications. From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1050 set the standard and marked the beginning of a new era in fuel injector performance. The first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly. The first injector to be offered in dead time matched sets. The first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder. The first injector offered with the now standard “Top Hat Adapter” making it plug and play in nearly any application. The Injector Dynamics Data. Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so its no wonder that if youre tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professional tuner, or an end user, you can spend countless hours getting it mostly correct or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability. Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers. These Injector Dynamics fuel injectors will fit many applications, including, but not limited to. Holden Commodore VZ LS2 Holden Commodore W427 LS7 These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Commodore E-HSV These will require a 14mm fuel rail spacer for proper fitment, not included. Holden Monaro LS2 Slope and Offset vs. Pressure data and tuning data for EFI Live and HP Tuners are available upon request. All high performance injectors will require ECU tuning for proper performance. We have injectors to fit almost every performance application! We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627. The free listing tool. The item “Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8″ is in sale since Tuesday, May 19, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “treperformance” and is located in Costa Mesa, California. This item can be shipped worldwide.
  • Part Brand: Injector Dynamics
  • Placement on Vehicle: Front
  • Important Information: Verify Flow Rate is what you need
  • Interchange Part Number: VZ LS2 LS3 LS7 LS9 EV6 USCAR 1000cc/min
  • Brand: Injector Dynamics
  • Warranty: Yes
  • Core Charge: None
  • Manufacturer Part Number: 1050.34.14.15.8.Holden

Injector Dynamics ID1050 Fit Holden Commodore Monaro W427 E-HSV Fuel cc/min 8