Tag Archives: intake

V8 Cold Air Intake Kit Silver fits Holden Commodore UTE Calais Omega HSV SSV SS

December 4, 2022coldcalais, cold, commodore, fits, holden, intake, omega, silveradmin

Online & After-Sales Support. And Great Service at a Great Price. V8 Cold Air Intake Kit Silver fits Holden Commodore UTE Calais Omega HSV SSV SS. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit. COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE. All LS2 6.0 and LS3 6.2 litre V8 engines. Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator. LS2 LS3 Manual or Auto. Easy to install for someone with a basic mechanical understanding – see instructions. This is a simple bolt-on modification, and ECU’s do not need to be re-tuned. Fitting normally will take less than an hour. Increases Horsepower and Torque. Enhances engine’s Volumetric Efficiency. Enhances Intake Sound (Induction Roar). Does not require bumper or headlight removal. Maintains all factory emissions components. Fits both manual and automatic transmission. Fully compatible and complementary with aftermarket remap/tune vehicles fitted with these cold air intake kits do not require ECU tuning of any kind to achieve results, This is a simple bolt-on modification. The Filter Pod picks up cold air from behind the headlamp and from behind the front bumper area. Intake temperatures are far cooler as the piping is made of Aluminium, has a greatly reduced heat transfer rate compared to the stock moulded plastic OEM fittings. These kits look great and sound even better – it has to be heard! 2x Hi-Temp Black Silicone Tubing. 4x High-Performance Clamps (Except for throttle body clamp – factory one is used). Full instructions with images. Re-usable, washable cotton high flow air cleaner pod which also aids in reducing fuel consumption. Customer feedback reports an increase of up to 10 Horsepower, increased throttle response, increased torque and an increase in fuel economy. Plus, it looks good and sounds even better. Recent Feedback Very happy with the product, once installed saw a power and throttle increase. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE Polished Aluminium (Silver) All LS2 6.0 and LS3 6.2 litre V8 engines Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator LS2 LS3 Manual or Auto Easy to install for someone with a basic mechanical understanding – see instructions. Increases Horsepower and Torque Improves Throttle Response Improves Fuel Economy Enhances engine’s Volumetric Efficiency Enhances Intake Sound (Induction Roar) Do. To suit Holden VE LS2 / LS3. Available in Silver or Black. Increase in horsepower and torque. What’s in the Box? Holden VE V6 3.6L Series 2 Cold Air Intake Kit Silver. Our product listings are for stock held within our own warehouse based in Carrum Downs, Victoria, and are available for immediate dispatch. We are proud of the range of products we offer, based on our love of anything to do with cars, 4WDing, caravanning and camping. We have no control over these. We do our best to ensure that all our listings are correct, however we are only human. We understand that sometimes an item may not turn out to be exactly what you needed. If you are not happy with this product, simply return it to us in its original condition and packaging within 30 days. We recommend returning with tracking to avoid loss of item. Communication does – please allow us up to 48 hours for us to investigate your inquiry. Cold Air Intake Kit Holden Commodore VE VF V8 6.0 6.2 SS SSV R8 LS2 LS3 Black. Our product listings are for stock held within our own warehouse based in Factory 4, 10 Gateway Drive, Carrum Downs, Victoria 3201, and are available for immediate dispatch. Autobox is an authorized Australian reseller for all of the brands that we stock in our store. 100% AUSTRALIAN FAMILY OWNED. Australia Wide on most items. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Air Filters”. The seller is “brito0199″ and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Autotecnica
Classic Part: No
Country/Region of Manufacture: China
Features: Easy Installation
Finish: not specified
Gasket Material: not specified
Item Diameter: not specified
Item Height: Not Specified
Item Length: Not Specified
Item Width: Not Specified
Items Included: not specified
Manufacturer Part Number: MFVES-640
Material: Cotton
Mounting Style: Bolt-On
Performance Part: Yes
Type: Cold Air Intake
Universal Fitment: No
Colour: Silver
MPN: MFVES-640

VE V8 Cold Air Intake Kit Holden Commodore 6.0 6.2 LS2 LS3 Ute Calais Omega HSV

September 14, 2022coldcalais, cold, commodore, holden, intake, omegaadmin

Online & After-Sales Support. And Great Service at a Great Price. VE V8 Cold Air Intake Kit Holden Commodore 6.0 6.2 LS2 LS3 Ute Calais Omega HSV. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit. COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE. All LS2 6.0 and LS3 6.2 litre V8 engines. Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator. LS2 LS3 Manual or Auto. Easy to install for someone with a basic mechanical understanding – see instructions. This is a simple bolt-on modification, and ECU’s do not need to be re-tuned. Fitting normally will take less than an hour. Increases Horsepower and Torque. Enhances engine’s Volumetric Efficiency. Enhances Intake Sound (Induction Roar). Does not require bumper or headlight removal. Maintains all factory emissions components. Fits both manual and automatic transmission. Fully compatible and complementary with aftermarket remap/tune vehicles fitted with these cold air intake kits do not require ECU tuning of any kind to achieve results, This is a simple bolt-on modification. The Filter Pod picks up cold air from behind the headlamp and from behind the front bumper area. Intake temperatures are far cooler as the piping is made of Aluminium, has a greatly reduced heat transfer rate compared to the stock moulded plastic OEM fittings. These kits look great and sound even better – it has to be heard! 2x Hi-Temp Black Silicone Tubing. 4x High-Performance Clamps (Except for throttle body clamp – factory one is used). Full instructions with images. Re-usable, washable cotton high flow air cleaner pod which also aids in reducing fuel consumption. Customer feedback reports an increase of up to 10 Horsepower, increased throttle response, increased torque and an increase in fuel economy. Plus, it looks good and sounds even better. Recent Feedback Very happy with the product, once installed saw a power and throttle increase. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE Polished Aluminium (Silver) All LS2 6.0 and LS3 6.2 litre V8 engines Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator LS2 LS3 Manual or Auto Easy to install for someone with a basic mechanical understanding – see instructions. Increases Horsepower and Torque Improves Throttle Response Improves Fuel Economy Enhances engine’s Volumetric Efficiency Enhances Intake Sound (Induction Roar) Do. To suit Holden VE LS2 / LS3. Available in Silver or Black. Increase in horsepower and torque. What’s in the Box? Holden VE V6 3.6L Series 2 Cold Air Intake Kit Silver. Our product listings are for stock held within our own warehouse based in Carrum Downs, Victoria, and are available for immediate dispatch. We are proud of the range of products we offer, based on our love of anything to do with cars, 4WDing, caravanning and camping. We have no control over these. We do our best to ensure that all our listings are correct, however we are only human. We understand that sometimes an item may not turn out to be exactly what you needed. If you are not happy with this product, simply return it to us in its original condition and packaging within 30 days. We recommend returning with tracking to avoid loss of item. Communication does – please allow us up to 48 hours for us to investigate your inquiry. Autotecnica Car Hail Stone Storm Protection Cover XL to 5.2m HSV VF GTS FPV. Billet Strut Tower Carbon Fibre Cover Set Commodore LS1 LS2 LS3 SV6 SS SSV VE VF. Cold Air Intake Kit Holden Commodore VE VF V8 6.0 6.2 SS SSV R8 LS2 LS3 Black. VF Commodore Series 1 Car Bra Holden SS SV6 Storm Thunder Ute Soft Non-Scratch. Our product listings are for stock held within our own warehouse based in Factory 4, 10 Gateway Drive, Carrum Downs, Victoria 3201, and are available for immediate dispatch. Autobox is an authorized Australian reseller for all of the brands that we stock in our store. 100% AUSTRALIAN FAMILY OWNED. Australia Wide on most items. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Air Filters”. The seller is “brito0199″ and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Autotecnica
Classic Part: No
Country/Region of Manufacture: China
Features: Easy Installation
Finish: not specified
Gasket Material: not specified
Item Diameter: not specified
Item Height: Not Specified
Item Length: Not Specified
Item Width: Not Specified
Items Included: not specified
Manufacturer Part Number: MFVES
Material: Cotton
Mounting Style: Bolt-On
Performance Part: Yes
Placement on Vehicle: Upper
Type: Air Filter
Universal Fitment: No
Colour: Silver
MPN: MFVES
UPC: 9338843001603
EAN: 9338843001603

VT VX VY VZ Holden Commodore & HSV LS1 V8 Mafless 4 Air Intake Pipe Kit 5.7lt

May 7, 2022holden57lt, commodore, holden, intake, mafless, pipeadmin

Proflow 4 Mafless Air Intake Pipe Suitable for VT VX VY VZ Holden Commodore& HSV LS1 LS2 V8. Designed and engineered in-house, Proflow products are manufactured to the highest of standards. Proflow products are computationally optimized and tested within their own engineering department. Rapid prototypes are created to guarantee perfect fitment, as well as pleasing aesthetics. Proflow take pride in every part they make. Remember, Proflow are the leaders in performance products! Proflow Cold Air Induction Kits are direct OEM replacement. Improves mileage, throttle response and induction noise. You can expect approximately 10-15HP. Includes all necessary hardware. Installs in approximately 30-45 minutes using basic hand tools. 4 Mafless air intake pipe. Made from high quality rubber. Supplied with hose & fitting. We also have another version of this kit designed to retain your standard MAF for straight plug and play, no tune required. Please see our store for further details. Suitable for ALL LS1 or LS2 Gen 3 5.7l OR 6.0l V8 VT VX VY & VZ Holden Commodore and HSV. Straight bolt on for your Commodore. MAFLESS tune is required prior to fitting. Please note that as there is some minor variation in intake pipe length in VT-VZ, these have been made to suit the longest model. If you do need to trim it back, you just use a utility knife to trim the rubber back – it cuts very easily. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Hoses, Lines & Pipes”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: PFEAIR5700M
Brand: Proflow
UPC: 9338762026312

VF Holden Commodore & HSV Clubsport Side Fascia Panels suit Harrop OTR Intake

February 4, 2022holdenclubsport, commodore, fascia, harrop, holden, intake, panels, side, suitadmin

Harrop Engineering Side Fascia Panel Kit Suitable for all VF Holden Commodore & HSV V8. When fitting any OTR you will see once the factory airbox system is removed that the front end of the engine bay will look quite empty, highlighting the fact that you have an aftermarket Harrop OTR. The OTR is designed to appear OE, so why not compliment it and finish the job with the purpose built Harrop Side Facia Panel Kit. This set of’wings’ fit on either side of the Harrop OTR and will give your engine bay a huge aesthetic boost to go along with your power gains from the OTR. Manufactured from a durable high temperature ABS polymer. Easy to install with simple hand tools in 10 minutes you can finish off the look of your engine bay. If you have a Harrop OTR intake system fitted to your pride and joy, then put the finishing touch on with the Side Facia Panel Kit to really impress. Also available is the Harrop Engineering Side Infill Panel kit designed to cover up the hole left from the removal of the factory airbox (please see our store for other listings). Harrop Side Fascia Panel kit suitable for all VF Holden Commodore & HSV V8. Compatible with Harrop OTR intake kit. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Other Air & Fuel Delivery”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: 99-AKIT12115
Brand: Harrop Engineering

VE Holden Commodore & HSV V8 LS2 LS3 L76 L98 Mafless 4 Air Intake Pipe Kit New

January 21, 2022holdencommodore, holden, intake, mafless, pipeadmin

Proflow 4 Mafless Air Intake Pipe Suitable for VE Holden Commodore & HSV LS2 LS3 L98 L76 L77 V8. Designed and engineered in-house, Proflow products are manufactured to the highest of standards. Proflow products are computationally optimized and tested within their own engineering department. Rapid prototypes are created to guarantee perfect fitment, as well as pleasing aesthetics. Proflow take pride in every part they make. Remember, Proflow are the leaders in performance products! Proflow Cold Air Induction Kits are direct OEM replacement. Improves mileage, throttle response and induction noise. You can expect approximately 10-15HP. Includes all necessary hardware. Installs in approximately 30-45 minutes using basic hand tools. 4 Mafless air intake pipe. Made from high quality rubber. Supplied with hose & fitting. We also have another version of this kit designed to retain your standard MAF for straight plug and play, no tune required. Please see our store for further details. Suitable for ALL VE Holden Commodore & HSV V8 LS2 LS3 L98 L76 L77. Straight bolt on for your Commodore. MAFLESS tune is required prior to fitting. Please note that as there is some minor variation in intake pipe length in VE models, these have been made to suit the longest model. If you do need to trim it back, you just use a utility knife to trim the rubber back – it cuts very easily. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Hoses, Lines & Pipes”. The seller is “tuffcarparts” and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: PFEAIR6000M
Brand: Proflow

Cold Air Intake Kit Silver Holden Commodore VE V8 SS SSV HSV R8 LS2 LS3 Maloo

January 20, 2022coldcold, commodore, holden, intake, maloo, silveradmin

Cold Air Intake Kit Silver Holden Commodore VE V8 SS SSV HSV R8 LS2 LS3 Maloo. Online & After-Sales Support. And Great Service at a Great Price. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit. COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE. All LS2 6.0 and LS3 6.2 litre V8 engines. Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator. LS2 LS3 Manual or Auto. Easy to install for someone with a basic mechanical understanding – see instructions. This is a simple bolt-on modification, and ECU’s do not need to be re-tuned. Fitting normally will take less than an hour. Increases Horsepower and Torque. Enhances engine’s Volumetric Efficiency. Enhances Intake Sound (Induction Roar). Does not require bumper or headlight removal. Maintains all factory emissions components. Fits both manual and automatic transmission. Fully compatible and complementary with aftermarket remap/tune vehicles fitted with these cold air intake kits do not require ECU tuning of any kind to achieve results, This is a simple bolt-on modification. The Filter Pod picks up cold air from behind the headlamp and from behind the front bumper area. Intake temperatures are far cooler as the piping is made of Aluminium, has a greatly reduced heat transfer rate compared to the stock moulded plastic OEM fittings. These kits look great and sound even better – it has to be heard! 2x Hi-Temp Black Silicone Tubing. 4x High-Performance Clamps (Except for throttle body clamp – factory one is used). Full instructions with images. Re-usable, washable cotton high flow air cleaner pod which also aids in reducing fuel consumption. Customer feedback reports an increase of up to 10 Horsepower, increased throttle response, increased torque and an increase in fuel economy. Plus, it looks good and sounds even better. Recent Feedback Very happy with the product, once installed saw a power and throttle increase. Autotecnica Holden VE LS2 / LS3 V8 Cold Air Intake Kit COLD AIR INTAKE KIT FOR V8 VE and VF (Series 1) COMMODORE Polished Aluminium (Silver) All LS2 6.0 and LS3 6.2 litre V8 engines Top-quality cold air intake system compatible with all LS2 6.0 and LS3 6.2 litre V8’s. SS and SSV Ute, Maloo R8 and Clubsport Calais Berlina Statesman Caprice HSV Senator LS2 LS3 Manual or Auto Easy to install for someone with a basic mechanical understanding – see instructions. Increases Horsepower and Torque Improves Throttle Response Improves Fuel Economy Enhances engine’s Volumetric Efficiency Enhances Intake Sound (Induction Roar) Do. To suit Holden VE LS2 / LS3. Available in Silver or Black. Increase in horsepower and torque. What’s in the Box? Holden VE V6 3.6L Series 2 Cold Air Intake Kit Silver. Our product listings are for stock held within our own warehouse based in Moorabbin, Victoria, and are available for immediate dispatch. We are proud of the range of products we offer, based on our love of anything to do with cars, 4WDing, caravanning and camping. We have no control over these. We do our best to ensure that all our listings are correct, however we are only human. We understand that sometimes an item may not turn out to be exactly what you needed. If you are not happy with this product, simply return it to us in its original condition and packaging within 30 days. We recommend returning with tracking to avoid loss of item. Communication does – please allow us up to 48 hours for us to investigate your inquiry. Holden VE VZ Billet Chrome & Carbon Fibre Engine Cap Cover Set HSV LS2 LS3 V8. VE Billet Window Washer Cap Cover Chrome w/ Carbon Fibre V6 V8 HSV SV6 SS UTE R8. Billet Power Steering Alloy Cap and Cover Set Holden VE Commodore LS1 LS2 SS V8. LS1 5.7 V8 Cold Air Intake Kit for VT VU VX VY Commodore SS UTE R8 Clubsport. Billet Strut Tower Carbon Fibre Cover Set Commodore LS1 LS2 LS3 SV6 SS SSV VE VF. VE VY VZ Billet Alloy Clutch Reservoir Commodore SS SSV SV6 V6 V8 HSV UTE Calais. Autobox is an authorized Australian reseller for all of the brands that we stock in our store. 100% AUSTRALIAN FAMILY OWNED. Australia Wide on most items. 11:00am – 2:30pm Monday to Friday. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Air Filters”. The seller is “brito0199″ and is located in this country: AU. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Autotecnica
Colour: Silver
MPN: MFVES-809
Manufacturer Part Number: MFVES-809

Holden Factory Air Box Intake VE VF LS3 V8 6.2L Commodore HSV

November 17, 2021holdencommodore, factory, holden, intakeadmin

Holden Factory Air Box Intake VE VF LS3 V8 6.2L Commodore HSV. AIR BOX AIR INTAKE. Holden / HSV LS3 Models VE, VF Commodore / HSV. Removed From VF HSV Clubsport R8 (LS3). Only 32,000 kms.. See Photos For condition…. Read before contacting us! As most of our listings are New Surplus Stock that is bought intermittently when available & at the right price! Please keep in mind to check all our current stock thoroughly & you can always check back later to see what new stock Holmart has managed to acquire as stock is constantly updating. No, as our stock is all up to date & listed exactly as you see it, nothing is hidden! I see you have some or most of the parts Im after! Then you probably have other parts similar laying around? HOLMART HOLDEN PARTS offers the highest quality in “PRIMARILY” NEW HOLDEN PARTS on the market today. Since 1989, we have provided superior service to our customers and have assisted them in achieving their goals. Our 20 YEARS of experience and commitment to excellence have earned us the reputation as the best AUTO PARTS WHOLESALER IN VICTORIA. Goods must be in original packaging, unused and in saleable condition. Items on special or items we have especially ordered in will have a credit note issued to you. The item “Holden Factory Air Box Intake VE VF LS3 V8 6.2L Commodore HSV” is in sale since Tuesday, October 12, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Other Car & Truck Parts & Accessories”. The seller is “holmart_online” and is located in Moorabbin. This item can be shipped worldwide.

Brand: Holden
MPN: HSVAIRFLOW
Manufacturer Part Number: HSVAIRFLOW

VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAF OTR Cold Air Intake 11-13

October 10, 2021holden11-13, cold, commodore, harrop, holden, intakeadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, retains MAF. Suitable for VE models built September 2011 – 2013. Why choose a Harrop OTR? The reasons are many so the decision should be obvious. Other intakes on the market utilise cheap filter elements that often look legitimate but are in fact produced using inferior materials that regularly fail quality control standards here in Australia. Unlike the filter element used throughout the Harrop OTR range, which is manufactured by the biggest name in filters, K&N, explicitly to Harrop specifications and is co-branded with the Harrop moniker, a name synonymous with performance and quality for more than 65 years. The Harrop OTR pioneered the unique two-piece construction of the main intake body. This was designed by Harrops in-house engineering department to address issues found with offerings from the competition – the biggest being filter sealing issues which have the potential for major issues for your engine. It has since become the go-to design for Holden OTR intakes from virtually all competitors however, the original Harrop design proves it is still far superior for strength, reliability and most importantly, power. Harrop also opted for a more premium option with external metal two-piece construction clamps, unlike competitors plastic tabs that are a part of the OTR housing that suffer from fatigue when they are bent open and closed to access the filter. This makes removing the filter far quicker and completely removes any stress put on the plastic OTR housing. When the filter is easier to access, youll also be far more inclined to service it regularly and enjoy the added performance from a clean element. Harrop OTR Cold Air Intake Kit. 100% Australian owned and designed. GENUINE washable & reusable K&N/Harrop air filter with a huge surface area, no inferior copies here. 100% housing sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple at home servicing and maintenance. OEM grade plastics, clips, fasteners and accessories. OEM grade fit and finish. Constructed from a durable high temperature ABS polymer meaning this OTR will still look great in years to come. Unlike other competitors, there are no fiddly and fragile plastic clips that will break over time. Interchangeable housing for VE from 2006 – VF 2017. You can take your OTR with you to fit on a different model (using the appropriate fitting kit). Retains your standard MAF (Mass Airflow Meter). Available in MAF or MAFLESS configurations – this listing is for MAF, please see our store for MAFLESS version. Supplied complete with fitting kit and instructions. Can be fitted at home using simple hand tools. Suitable for VE Holden Commodore & HSV LS2 L76 L77 L98 LS3 6lt 6.2lt V8, models built September 2011 2013 (for 2006 through August 2011 models, please see our store for other listings). Vehicles fitted with the VE HSV E2-E3 fluted bonnet (HSV E2-E3 & Pontiac G8 front) will require bonnet modifications which may include trimming the bonnet lining and bonnet braces to provide clearance. The item “VE Holden Commodore HSV LS2 L76 L98 LS3 V8 Harrop MAF OTR Cold Air Intake 11-13″ is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: 99-AKIT12929
Brand: Harrop Engineering
Type: Cool Air Intake

VF Holden Commodore HSV Harrop MAF OTR Cold Air Intake Kit LS3 L77 6L 6.2L V8

October 9, 2021holdencold, commodore, harrop, holden, intakeadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Suitable for VF LS3 & L77 Holden Commodore & HSV Retain MAF. Harrop Engineering is a true Australian success story. With their proven philosophy of delivering solutions based on excellence in design and manufacturing, the company has a rich history dating back more than 60 years. Driven by quality and performance, the Harrop team is committed to improving the safety, reliability and durability of their engineering products. Harrops quality-assurance system is accredited by world standards. This, combined with the company’s advanced product quality planning system, allow Harrop to deliver an outstanding level of service to their broad customer base ranging from global OE vehicle manufacturers to serious performance enthusiasts. With their specialised performance range of OTRs, superchargers, camshafts and manifolds, you can rest assured this pedigree guarantees you the very best possible quality intake on the market, all at a very sharp price. There are many OTR options available to V8 Commodore owners these days, so what makes the Harrop offering stand out from the pack? The Harrop Over the Radiator (OTR) cold air induction (CAI) system pioneered a unique two-piece construction of the main intake body. This was designed by Harrops huge in-house engineering department to address issues with other variants currently available – the biggest being filter sealing issues which have the potential for major issues for your engine. The two-piece construction clamps the K&N filter element between the two intake halves creating a 100% airtight seal. This results in an intake system that ensures complete air filtration while providing greater airflow and engine performance. The Harrop OTR range stands out against some well known competing brands with some unique features. Harrop Engineering Over The Radiator Cold Air Intake (MAF). 100% Australian owned and designed. Engineered by one of the greatest and longest standing names in the business. GENUINE purpose built K&N-Harrop air filter with a huge surface area, no inferior copies here. Two piece design that enables 100% sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple servicing and maintenance. OEM grade plastic finishes, clips, fasteners and accessories. OE style, constructed from a durable high temperature ABS polymer. No fiddly and fragile clips that will break in time with routine servicing this product is designed to be serviced, and to last. Interchangeable housing for 2006 -2016 Commodores models meaning you can take your OTR with you to fit on a later model. With a history steeped in racing history, the Harrop OTR has been fitted on some of the quickest Holdens in the country and it can drastically improve your VE Holdens performance too! Suitable for VF LS3 & L77 V8 Holden Commodore & HSV models. Listing is for OTR Cold Air Intake only. For a complete bundle or separate Side Fascia and Infill Panels, please see out other listings. Designed to retain your standard airflow meter (MAF). Please see our store for MAFLESS version. Will not suit V6 models. Will not suit forced induction applications. For FDFI suitable intakes, please see our other listings. For optimal results Harrop recommends every vehicle fitted with an OTR should receive a Dyno tune. This will ensure maximum performance gains and driveability characteristics are achieved. Models requiring bonnet modification include VE HSV with fluted bonnet (HSV E2-E3, VE G8 Pontiac Front) Please contact our team for installation guide. Additional brackets may be required for non-standard radiator supports missing mounting tabs. Please contact our team if these are required for your application. The item “VF Holden Commodore HSV Harrop MAF OTR Cold Air Intake Kit LS3 L77 6L 6.2L V8″ is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Non-Domestic Product: No
Manufacturer Part Number: 99-AKIT12316
Modified Item: No
Custom Bundle: No
Brand: Harrop Engineering
Type: Cool Air Intake

VF Holden Commodore HSV LS3 L77 6L 6.2L V8 Harrop MAFLESS OTR Cold Air Intake

October 7, 2021holdencold, commodore, harrop, holden, intake, maflessadmin

Harrop Over The Radiator (OTR) Cold Air Intake for VE VF Holden V8. Harrop Engineering Over The Radiator (OTR) Cold Air Intake Kit. Suitable for VF LS3 & L77 Holden Commodore & HSV MAFLESS. Harrop Engineering is a true Australian success story. With their proven philosophy of delivering solutions based on excellence in design and manufacturing, the company has a rich history dating back more than 60 years. Driven by quality and performance, the Harrop team is committed to improving the safety, reliability and durability of their engineering products. Harrops quality-assurance system is accredited by world standards. This, combined with the company’s advanced product quality planning system, allow Harrop to deliver an outstanding level of service to their broad customer base ranging from global OE vehicle manufacturers to serious performance enthusiasts. With their specialised performance range of OTRs, superchargers, camshafts and manifolds, you can rest assured this pedigree guarantees you the very best possible quality intake on the market, all at a very sharp price. There are many OTR options available to V8 Commodore owners these days, so what makes the Harrop offering stand out from the pack? The Harrop Over the Radiator (OTR) cold air induction (CAI) system pioneered a unique two-piece construction of the main intake body. This was designed by Harrops huge in-house engineering department to address issues with other variants currently available – the biggest being filter sealing issues which have the potential for major issues for your engine. The two-piece construction clamps the K&N filter element between the two intake halves creating a 100% airtight seal. This results in an intake system that ensures complete air filtration while providing greater airflow and engine performance. The Harrop OTR range stands out against some well known competing brands with some unique features. Harrop Engineering Over The Radiator Cold Air Intake (MAFLESS). 100% Australian owned and designed. Engineered by one of the greatest and longest standing names in the business. GENUINE purpose built K&N-Harrop air filter with a huge surface area, no inferior copies here. Two piece design that enables 100% sealing around the filter element NOTHING gets around the air filter with this design. Easily removable filter for simple servicing and maintenance. OEM grade plastic finishes, clips, fasteners and accessories. OE style, constructed from a durable high temperature ABS polymer. No fiddly and fragile clips that will break in time with routine servicing this product is designed to be serviced, and to last. Interchangeable housing for 2006 -2016 Commodores models meaning you can take your OTR with you to fit on a later model. With a history steeped in racing history, the Harrop OTR has been fitted on some of the quickest Holdens in the country and it can drastically improve your VE Holdens performance too! Suitable for VF LS3 & L77 V8 Holden Commodore & HSV models. Listing is for OTR Cold Air Intake only. For a complete bundle or separate Side Fascia and Infill Panels, please see out other listings. Designed to remove your factory airflow meter (MAFLESS). Please see our store for MAF version. MAFLESS tune is required. Will not suit V6 models. Will not suit forced induction applications. For FDFI suitable intakes, please see our other listings. For optimal results Harrop recommends every vehicle fitted with an OTR should receive a Dyno tune. This will ensure maximum performance gains and driveability characteristics are achieved. Models requiring bonnet modification include VE HSV with fluted bonnet (HSV E2-E3, VE G8 Pontiac Front) Please contact our team for installation guide. Additional brackets may be required for non-standard radiator supports missing mounting tabs. Please contact our team if these are required for your application. The item “VF Holden Commodore HSV LS3 L77 6L 6.2L V8 Harrop MAFLESS OTR Cold Air Intake” is in sale since Wednesday, September 29, 2021. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Air Intake, Fuel Delivery\Air Intake Systems”. The seller is “tuffcarparts” and is located in Melbourne, VIC. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Manufacturer Part Number: 99-AKIT12317
Brand: Harrop Engineering
Type: Cool Air Intake

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30